Vszerda
Vszerda PCIe 4.0 x1 Riser Cable Dual 90 Degree
PCIe 4.0 x1 extension cable with dual 90-degree connectors for flexible desktop GPU mounting
- Supports PCIe 4.0 speeds up to 8 Gb/s
- Dual 90-degree connectors fit tight chassis spaces
- Extends x1 slot without signal loss
- New cable ready for desktop installation
PCIe 4.0 x1 riser with dual 90-degree connectors
This Vszerda cable extends a single PCI Express 4.0 lane from the motherboard to a peripheral slot. Both ends are angled at 90 degrees to help route the link in compact chassis. The assembly is rated for the Gen 4 signalling rate of 8 Gb/s.
For installing one x1 add-in card where clearance
The extender carries only a single lane, so it cannot support multi-lane devices such as graphics cards. Builders who need a longer reach or a straight connector should choose a different cable.
Highlights
- Supports PCIe 4.0 speeds up to 8 Gb/s
- Dual 90-degree connectors fit tight chassis spaces
- Extends x1 slot without signal loss
- New cable ready for desktop installation
Specifications
No published specifications for this item yet.
Questions about this item
Will the dual 90-degree connectors fit inside a tight case without stressing the PCIe 4.0 slot?
The dual 90-degree design routes the cable close to the motherboard, reducing strain on the PCIe 4.0 x1 slot in compact builds.
Does the cable generate extra heat or draw more power during all-day mining or compute workloads?
As a passive PCIe Gen 4 extender, it adds no active components, so heat and power draw remain negligible under sustained use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



