We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PCIe 3.0 x4 to SFF-8639 U.2 / SFF-8654 Slimline SAS NVME Adapter

SKU CH-H5WY-W0E7E

Connects PCIe 3.0 x4 NVMe SSDs via U.2 SFF-8639 or Slimline SAS SFF-8654 interfaces

  • Connect PCIe 3.0 x4 NVMe SSDs via SFF-8639 U.2 interface
  • Convert SFF-8654 Slimline SAS connectors to standard PCIe slots
  • Supports Intel SSD 750 series M.2 NVMe drives
  • Includes PCIe card and standard bracket for installation
  • Compact 6.14 x 4.13 x 0.59 inch form factor

PCIe 3.0 x4 to U.2 adapter

This Vszerda adapter converts a PCIe 3.0 x4 slot into an SFF-8639 U.2 connector and an SFF-8654 Slimline SAS NVMe interface. It is designed for mainboards using drives such as the Intel SSD 750 M.2. The package includes the PCIe card and a standard bracket.

Works with PCIe SSDs only

The card works exclusively with PCIe SSDs and will not function with SAS or Slimline SAS hard drives. Builders needing to attach spinning disks or SAS-based storage should consider a different controller.

PCIe 3.0 x4 host interface

The adapter requires a PCIe 3.0 x4 slot on the motherboard to deliver full bandwidth to the connected NVMe drive. Systems limited to PCIe 2.0 or fewer lanes will not achieve the intended throughput.

Highlights

  • Connect PCIe 3.0 x4 NVMe SSDs via SFF-8639 U.2 interface
  • Convert SFF-8654 Slimline SAS connectors to standard PCIe slots
  • Supports Intel SSD 750 series M.2 NVMe drives
  • Includes PCIe card and standard bracket for installation
  • Compact 6.14 x 4.13 x 0.59 inch form factor

Specifications

No published specifications for this item yet.

Questions about this item

Will the PCIe 3.0 x4 slot limit the speed of a fast NVMe drive?

The adapter runs at PCIe 3.0 x4, so the drive will operate at that generation and lane width.

Does the adapter need active cooling when an NVMe SSD runs all day?

The card is a passive PCB with no fan; heat depends on the drive itself and the case airflow.

What maintenance or replacement might this adapter need over time?

There are no moving parts or wear items on the board; it only needs replacement if physically damaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.