Vszerda
Vszerda PCIe 3.0 4.0 to SFF-8654 Slimline SAS Card Adapter and U.2 U2 SFF-8639 NVME PCIe SSD Cable
Connects a U.2 NVMe SSD to a mainboard via SFF-8654 using PCIe 3.0 and 4.0 with a 50cm cable
- Connect U.2 NVMe drives via SFF-8654 Slimline SAS
- Supports PCIe 3.0 and 4.0 speeds up to 4x lanes
- Includes 50cm cable and adapter card for mainboard SSD 750
- Not compatible with SAS or SATA disks
- Works with Windows 10 or later operating systems
PCIe 3.0 4.0 Adapter for U.2 NVMe SSD
This adapter connects a U.2 NVMe SSD to a mainboard using an SFF-8654 Slimline SAS interface. It supports both PCIe 3.0 and 4.0 speeds across four lanes. The package includes the adapter card and a 50cm cable. It is designed for builders adding high-speed U.2 storage to a compatible platform.
Upgrade Path from SATA or Basic M.2
The card replaces a direct SATA connection or a limited M.2 slot by enabling a U.2 NVMe drive over PCIe 3.0 or 4.0. The jump is worth it when the workload demands the bandwidth of a four-lane NVMe device. It does not support SAS or SATA disks, so the upgrade only applies to NVMe U.2 drives.
Limits of the SFF-8654 Interface
The SFF-8654 connector carries four PCIe lanes up to 4.0 speeds, but the cable length is fixed at 50cm. The adapter requires a mainboard with an SFF-8654 port and an operating system of Windows 10 or later. It cannot be used with SAS or SATA protocols, limiting it strictly to NVMe U.2 devices.
Highlights
- Connect U.2 NVMe drives via SFF-8654 Slimline SAS
- Supports PCIe 3.0 and 4.0 speeds up to 4x lanes
- Includes 50cm cable and adapter card for mainboard SSD 750
- Not compatible with SAS or SATA disks
- Works with Windows 10 or later operating systems
Specifications
No published specifications for this item yet.
Questions about this item
Does the 50 cm cable reach from a full-length PCIe slot to a front-panel U.2 bay?
The included cable is 50 cm long; measure your chassis routing path to confirm it spans the distance between the card slot and the U.2 drive bay.
Which way does the SFF-8654 connector on the card key into the slot?
Insert the card into a PCIe 3.0 or 4.0 x4 slot with the SFF-8654 port facing the rear bracket, then attach the 50 cm cable to the port and the U.2 SSD.
Will the SFF-8639 end of the cable need replacement if I switch to a newer U.2 NVMe drive?
The cable uses the standard SFF-8639 U.2 interface, so it remains compatible with current and future U.2 NVMe SSDs that use the same connector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



