We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB riser card with four USB 3.0 ports and a PCIe x1 edge connector

Vszerda

Vszerda PCIe 1x to 4 Slot Riser Card 60cm USB 3.0

SKU CH-Q2TA-EX7WF

A PCIe 1x riser that expands one slot into four 16x ports with a 60cm USB 3.0 cable for multi-GPU mining rigs

  • Converts one PCIe x1 slot into four x16 slots
  • 60 cm USB 3.0 shielded cable fits 1U to 3U chassis
  • 2-layer PCB with solid capacitors for stable power
  • Compatible with DOS, Linux and Windows XP through 10
  • Weighs 70 g and measures 120 × 55 × 75 mm

1x-to-4-slot PCIe riser for mining rigs

This Vszerda adapter converts a single PCIe x1 slot into four x16 electrical connectors so multiple graphics cards can be attached to one motherboard. It is intended for cryptocurrency mining builds that need dense GPU packing without adding extra boards.

Verify OS limits and power delivery before ordering

Windows 10 recognises up to eight graphics cards while Windows 7 stops at six; Linux is required for larger counts. All GPUs on the same board should share the same driver revision. The board draws auxiliary power through SATA connectors that must be supplied by the system PSU.

USB 3.0 cable and SATA power leads included

A 60 cm shielded USB 3.0 cable links the riser to the motherboard and fits 1U to 3U chassis. Four SATA power cables are bundled to feed the onboard solid capacitors, giving each attached card a steadier supply than the slot alone can provide.

Highlights

  • Converts one PCIe x1 slot into four x16 slots
  • 60 cm USB 3.0 shielded cable fits 1U to 3U chassis
  • 2-layer PCB with solid capacitors for stable power
  • Compatible with DOS, Linux and Windows XP through 10
  • Weighs 70 g and measures 120 × 55 × 75 mm

Specifications

No published specifications for this item yet.

Questions about this item

Does the riser card include the USB 3.0 cables or SATA power cables needed to connect four graphics cards?

The package contains only the 1× to 4-slot riser board; the 60 cm USB 3.0 cables and any SATA power cables must be purchased separately.

Which version of the riser should I choose if I want to run four GPUs on a single PCIe x1 slot?

This single model provides four PCIe x16 electrical slots from one PCIe x1 connector, so no alternative version or capacity exists for that configuration.

What does the four-slot multiplier mean for actual GPU recognition under Windows 10?

Windows 10 limits detection to eight graphics cards per motherboard, so four GPUs on this riser will be recognised provided the total stays within that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.