We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with four long white slots and a blue USB 3.0 cable attached

Vszerda

Vszerda PCIe 1-to-4 Riser Card 1X to 16X USB 3.0 60cm

SKU CH-4SE4-4K6X6

A PCIe 1X to four 16X slot riser with 60 cm USB 3.0 cable, compliant with PCIe 2.0 and 1.1 specifications

  • Expands one PCIe x1 slot into four x16 slots using a 60 cm USB 3.0 cable
  • Compliant with PCIe 2.0 and 1.1 specifications for broad hardware compatibility
  • Four independent x1 slots accept sound, video or network cards without mutual interference
  • Supports 4-port high-speed PCIe x16 cards for multi-GPU or multi-device setups
  • Works with Linux, Windows XP, 7, 8, 8.1 and 10 out of the box

PCIe 1X to 4-slot 16X riser

This Vszerda adapter converts a single PCI Express 1X slot into four 16X physical slots using a 60 cm USB 3.0 cable. It complies with the PCI Express 2.0 and 1.1 specifications and supports Linux, Windows XP, 7, 8, 8.1 and 10. Each slot can host a sound card, video card or network card operating independently.

Builders needing extra PCIe slots without

The card suits DIY enthusiasts who have a spare PCIe 1X slot and want to add multiple peripherals such as GPUs for mining or additional I/O cards. It is not for systems that lack a free 1X slot or require native 16-lane electrical bandwidth for every installed card.

60 cm USB 3.0 cable and four 16X connectors

The included high-speed cable allows flexible placement of the riser board inside the chassis. Four 16X physical slots let you plug in up to four expansion cards simultaneously. No driver disc or extra software is mentioned, so the device relies on the operating system's built-in PCIe support.

Highlights

  • Expands one PCIe x1 slot into four x16 slots using a 60 cm USB 3.0 cable
  • Compliant with PCIe 2.0 and 1.1 specifications for broad hardware compatibility
  • Four independent x1 slots accept sound, video or network cards without mutual interference
  • Supports 4-port high-speed PCIe x16 cards for multi-GPU or multi-device setups
  • Works with Linux, Windows XP, 7, 8, 8.1 and 10 out of the box

Specifications

No published specifications for this item yet.

Questions about this item

My motherboard only has one free PCIe x1 slot — will that be enough to run this four-slot riser card?

Yes, the card plugs into a single PCIe x1 slot and splits it into four PCIe 16X connectors using the 60 cm USB 3.0 cable.

I still run Windows 7 on one rig — will the riser card be recognised without extra drivers?

The adapter complies with PCI Express 2.0 and 1.1 and is listed as compatible with Windows 7, 8, 8.1 and 10 as well as Linux and XP.

After I connect four graphics cards, how can I confirm every port is running at the expected 16X electrical width?

Check Device Manager or lspci — each card should appear on its own bus with a x16 link width, showing the riser is passing the full 16 lanes per slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.