We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PCIe cable with single 8-pin 6+2 connector

Vszerda

Vszerda PCI-E 8Pin 6+2Pin GPU Cable for Antec EAG 550W 650W 750W

SKU CH-2QT4-JNFFQ

PCI-E 8-pin (6+2) GPU power cable compatible with Antec EAG 550W, 650W and 750W semi-modular PSUs

  • Delivers reliable GPU power with a single 8-pin 6+2 connector
  • Compatible with Antec EAG 550W, 650W and 750W PRO Earthwatts Gold units
  • Semi-modular design keeps cable routing clean inside the case
  • New condition ensures full performance from first use

Compatible PCIe Cable for Antec EAG PSUs

This Vszerda PCI-E cable connects a graphics card to Antec EAG 550W, 650W and 750W PRO Earthwatts Gold semi-modular power supplies. It carries a single 8-pin connector that splits into 6+2 pins for GPU compatibility. The cable suits builders upgrading or replacing a GPU power lead on these specific PSU models.

Modular Port Fit and Pin Alignment

Installation requires a free modular port on the Antec EAG unit and correct orientation of the 8-pin plug. Problems occur when the cable is forced into the wrong keyed slot or when the 6+2 segment is not fully seated on the graphics card. Builders using non-Antec or different EAG wattage units cannot use this cable.

Highlights

  • Delivers reliable GPU power with a single 8-pin 6+2 connector
  • Compatible with Antec EAG 550W, 650W and 750W PRO Earthwatts Gold units
  • Semi-modular design keeps cable routing clean inside the case
  • New condition ensures full performance from first use

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the Vszerda PCI-E 8Pin 6+2Pin GPU cable is working correctly after connecting it to my Antec EAG 750W PSU?

After installation, power on the system and confirm the graphics card initialises with no POST errors or visual artefacts; stable operation under load indicates the cable is delivering power as intended.

What connectors are included with the Vszerda PCI-E cable for the Antec EAG 650W, and do I need any extra adapters?

The cable has a single 8-pin (6+2) PCI-E connector on the GPU end and a modular PSU-end plug made for Antec EAG 550W, 650W and 750W units; no additional adapters are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.