Vszerda
Vszerda PCI-E 4X USB 3.1 10Gbps Type-C Type-A ASM1142 Riser Card
Adds one USB 3.1 Type-C and one USB 3.1 Type-A port at 10 Gbps via a PCIe 4x slot with ASM1142 chipset and solid capacitors
- Adds two 10 Gbps USB 3.1 ports via a PCI-E 4X slot
- ASMedia ASM1142 chipset delivers stable 10 Gbps full-duplex throughput
- Over-current and short-circuit protection on each port safeguards connected devices
- All solid capacitors resist harsh environments for long-term reliability
- Low-profile bracket fits 1U and 2U server cases
PCI-E 4X to dual USB 3.1 expansion
This Vszerda riser card adds one USB 3.1 Type-C port and one USB 3.1 Type-A port to any PCI-E x4, x8 or x16 slot. It uses the ASM1142 chipset and is compatible with Windows 2000 through Windows 10. The card targets desktop owners who need modern USB ports without replacing their motherboard.
10 Gbps peak bandwidth with legacy support
The adapter delivers up to 10 Gbps over the PCI-E 2.0 x2 lane connection and negotiates down to 5 Gbps, 480 Mbps or 12 Mbps for older devices. Actual throughput depends on the host slot configuration and the connected peripheral. Systems limited to PCI-E 1.1 lanes will not reach the rated ceiling.
Low-profile bracket and solid capacitors included
A half-height bracket lets the card fit in 1U or 2U server chassis. Each port carries over-current and short-circuit protection, while all-solid capacitors improve durability in harsh environments. Driver installation is required on all supported Windows versions.
Highlights
- Adds two 10 Gbps USB 3.1 ports via a PCI-E 4X slot
- ASMedia ASM1142 chipset delivers stable 10 Gbps full-duplex throughput
- Over-current and short-circuit protection on each port safeguards connected devices
- All solid capacitors resist harsh environments for long-term reliability
- Low-profile bracket fits 1U and 2U server cases
Specifications
No published specifications for this item yet.
Questions about this item
Will the ASM1142 chipset card work in my older PCIe 2.0 x16 slot?
Yes, the PCIe 2.0 x2 compliant card fits any PCIe x4, x8 or x16 slot and runs at the slot's native speed.
How can I verify the 10 Gbps link is active after installing the driver?
Open Device Manager, locate the ASM1142 controller under Universal Serial Bus controllers, and confirm the port reports SuperSpeed+ 10 Gbps.
Does the box include a low-profile bracket for my 1U server?
A low-profile bracket is supplied; cables and external drives are not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
STARWELL Privacy Screen Protector Galaxy S22 Plus 6.6 Blue Light Blocking Alignment Kit
- Screen Protector
STARWELL 4-Pack 9H+ Tempered Glass Screen Protector for iPhone 16 Pro Max 6.9 inch Auto Alignment Kit
- Screen Protector
STARWELL DiamondClear 9H+ Tempered Glass Screen Protector iPhone 17 Pro Max 6.9 2 Pack
- Screen Protector



