Vszerda
Vszerda PCI-E 4X to 16X Adapter Card data adapter
Converts a PCIe 4x slot into a 16x connection for expansion cards
- Converts a PCI-E 4X slot into a 16X connection
- Riser-card design fits inside standard desktop chassis
- Passive circuitry needs no extra power cables
- Enables larger add-in cards on limited motherboard slots
PCI-E 4X to 16X Riser Card
This Vszerda adapter converts a PCI Express x4 slot into a full-length x16 connector for desktop computers. It enables installation of larger expansion cards where only a shorter slot is available. The board carries signal traces between the two interfaces without active circuitry.
Builders needing x16 physical clearance from an x4
Users who require the full electrical bandwidth of a native x16 link should not use this adapter, as the connection remains limited to four lanes. Systems without a spare x4 or larger slot cannot accommodate the card.
Highlights
- Converts a PCI-E 4X slot into a 16X connection
- Riser-card design fits inside standard desktop chassis
- Passive circuitry needs no extra power cables
- Enables larger add-in cards on limited motherboard slots
Specifications
No published specifications for this item yet.
Questions about this item
Does my motherboard need a free PCI-E 4X slot to install this adapter?
Yes, the adapter plugs into an available PCI-E 4X slot on the motherboard and extends it to a 16X physical connector for add-in cards.
Will a graphics card limited to PCI-E 1.0 speeds work in the 16X slot provided by this adapter?
The adapter passes through the electrical 4X link from the motherboard; a PCI-E 1.0 card will negotiate down to the lowest common speed and function normally.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



