We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M.2 edge connector and Oculink port

Vszerda

Vszerda PCI-E 4.0 M.2 M-Key to Oculink SFF-8612 Adapter 2260

SKU CH-5E9Z-ZXB0P

Connects an OCuLink SFF-8612 device to an M.2 2260 M-key slot with PCIe 4.0 speeds up to 64 Gbps

  • Transmits PCIe signals via NVMe protocol for direct SSD connection
  • Up to 64 Gbps transfer rate with NVMe 1.2 support
  • Connects U.2 SSD through SFF-8612 interface to M.2 slot
  • M.2 2260 form factor fits key M PCIe slots
  • Bootable from UEFI 2.3.1 with Linux 4.3+ and Windows 8.1+

PCI-E 4.0 M.2 to Oculink adapter

This Vszerda adapter converts a single M.2 M-key slot into an Oculink SFF-8612 interface. It transmits PCI Express signals using the NVMe protocol and supports NVMe 1.2. The card fits the 2260 form factor and connects directly to a compatible M.2 slot.

For adding external NVMe storage via Oculink

Builders who want to attach a U.2 or Oculink SSD to an internal M.2 slot can use this host adapter. It is not suited for systems lacking a free M.2 M-key connector. Buyers needing multiple drive connections or a different host interface should look elsewhere.

PCI-E 4.0 x4 signal support up to 64 Gbps

The adapter carries a PCI-E 4.0 link with a data rate up to 64 Gbps through the SFF-8612 connector. This bandwidth ceiling determines whether the attached SSD can reach its rated speed. Verify that the host platform provides a PCI-E 4.0 M.2 slot to utilise the full capability.

Highlights

  • Transmits PCIe signals via NVMe protocol for direct SSD connection
  • Up to 64 Gbps transfer rate with NVMe 1.2 support
  • Connects U.2 SSD through SFF-8612 interface to M.2 slot
  • M.2 2260 form factor fits key M PCIe slots
  • Bootable from UEFI 2.3.1 with Linux 4.3+ and Windows 8.1+

Specifications

No published specifications for this item yet.

Questions about this item

What free slot must the motherboard provide for the Vszerda M.2 2260 adapter to be installed?

The motherboard needs an available M.2 slot with key M that is based on PCIe.

Will the adapter run at PCIe 3.0 speeds if my platform only supports PCIe 3.0?

Yes, the card transmits PCI Express signals using the NVMe protocol and will operate at the speed of the host slot, up to 32 Gbps on PCIe 3.0.

How can I confirm the Vszerda adapter is functioning after installing it and connecting an NVMe drive?

The drive should appear in the system BIOS or UEFI firmware and be visible to the operating system once the appropriate drivers are loaded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.