We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Oculink SFF-8611 male to U.2 U.3 SFF-8639 female NVME PCIe cable with SATA power 50cm

Vszerda

Vszerda Oculink SFF-8611 to U.2 U.3 SFF-8639 NVME PCIe 4.0 50cm sata cable

SKU CH-BZHZ-9TVGE

Connects an Oculink SFF-8611 host to a U.2 or U.3 SFF-8639 NVMe SSD with SATA power over 50 cm, supporting PCIe 4.0 and 3.0 x4

  • Connect Intel SSD 750 M.2 drives via Oculink SFF-8611
  • Reach U.2/U.3 NVMe SSDs with 50cm cable length
  • Power U.2/U.3 drives using integrated SATA power connector
  • Support PCIe 4.0 x4 speeds for fast NVMe transfers
  • Compatible with Hyper Kit storage controllers and Ultra M.2 cards

Connection Type

The Vszerda Oculink SFF-8611 to U.2 U.3 SFF-8639 cable connects NVME PCIe SSDs to a mainboard Oculink port. It includes a SATA power connector to supply the drive. The 50cm length suits internal chassis routing. It supports PCIe 4.0 and 3.0 x4 signalling for compatible solid-state storage.

Upgrade Path

This cable replaces a direct M.2 mount when the board offers an Oculink SFF-8611 header instead. It allows an Intel SSD 750 M.2 or similar drive to sit in a drive bay while retaining full x4 bandwidth. The jump is worthwhile when the M.2 slot is occupied or absent but an Oculink link is free.

Target Builder

Builders adding U.2 or U.3 NVME drives to a mainboard with an SFF-8611 header will use this cable. It is not for systems lacking that specific Oculink connector. Buyers needing a drive powered solely from the slot without a SATA power lead should look elsewhere.

Highlights

  • Connect Intel SSD 750 M.2 drives via Oculink SFF-8611
  • Reach U.2/U.3 NVMe SSDs with 50cm cable length
  • Power U.2/U.3 drives using integrated SATA power connector
  • Support PCIe 4.0 x4 speeds for fast NVMe transfers
  • Compatible with Hyper Kit storage controllers and Ultra M.2 cards

Specifications

No published specifications for this item yet.

Questions about this item

What connectors must my motherboard and drive have for this 50 cm cable to fit?

The cable needs an Oculink SFF-8611 male port on the motherboard or controller and a U.2/U.3 SFF-8639 female port on the NVME SSD.

How do I install the cable and which step is often missed?

Plug the SFF-8611 end into the mainboard Oculink port, attach the SFF-8639 end to the drive, then connect the SATA power plug to a PSU SATA connector — forgetting the power lead is the common mistake.

What maintenance or replacement will this cable need over time?

No scheduled maintenance is required; replace the cable only if the connectors become loose, the SATA power lead frays, or the PCIe 4.0 / 3.0 x4 link shows errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.