We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black enclosure with Oculink ports and M.2 slot, plus cables

Vszerda

Vszerda Oculink SFF-8611/8612 to M.2 NVMe Enclosure Adapter

SKU CH-YF94-4KN0P

Connects an M.2 NVME SSD (2230, 2242, 2260, 2280) to a mainboard via Oculink SFF-8611/8612 at PCIe 4.0 x4, includes enclosure, cable and DC power

  • Connect NVMe SSDs at PCIe 4.0 x4 speeds via Oculink 4x interface
  • Supports M.2 2230, 2242, 2260 and 2280 form factors internally
  • Includes Oculink cable and DC power cable for immediate installation
  • Converts SFF-8611 and SFF-8612 ports to M-Key NVMe slot
  • Does not support SAS, Slimeline SAS or SATA protocols

Oculink SFF-8611/8612 to M.2 NVMe Adapter

This adapter connects a single M.2 NVMe SSD to a mainboard through an Oculink SFF-8611 or SFF-8612 interface. It supports PCIe 4.0 x4 speeds and accepts 2230, 2242, 2260 and 2280 drive lengths. The package includes the enclosure, an Oculink cable and a DC power cable.

Who this suits and who should look elsewhere

It suits builders adding NVMe storage via an available Oculink port on a compatible board. It will not work for SATA or NGFF M.2 drives, nor for SAS or Slimline SAS devices. Buyers needing SATA-to-NVMe conversion or multi-drive enclosures should look elsewhere.

Deciding specification — PCIe 4.0 x4 over Oculink

The enclosure delivers PCIe 4.0 x4 bandwidth through the Oculink connection, which determines the maximum throughput for the installed NVMe SSD. Verify that your mainboard provides an SFF-8611 or SFF-8612 port wired for PCIe 4.0 x4 before purchasing.

Highlights

  • Connect NVMe SSDs at PCIe 4.0 x4 speeds via Oculink 4x interface
  • Supports M.2 2230, 2242, 2260 and 2280 form factors internally
  • Includes Oculink cable and DC power cable for immediate installation
  • Converts SFF-8611 and SFF-8612 ports to M-Key NVMe slot
  • Does not support SAS, Slimeline SAS or SATA protocols

Specifications

No published specifications for this item yet.

Questions about this item

Does the SFF-8612 Oculink interface run at PCIe 4.0 x4 speeds?

Yes, the enclosure uses a PCIe 4.0 x4 connection through the SFF-8611 or SFF-8612 Oculink port, so an NVME SSD can reach full 4.0 bandwidth.

What M.2 drive lengths and keying does the enclosure accept?

The M-key slot fits NVME SSDs in 2230, 2242, 2260 and 2280 sizes; SATA or NGFF drives are not supported.

How is the adapter powered and what cable is required?

A DC power cable is included and must be connected; the Oculink cable alone does not supply power to the SSD.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.