We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
OCuLink SFF-8611 4i cable splitting to four SFF-8482 SAS 29-pin connectors with SATA 15-pin power adapter

Vszerda

Vszerda OCuLink SFF-8611 4i to 4x SFF-8482 SAS 29P SATA 15P 1m

SKU CH-H9B7-J1Z74

Connects OCuLink SFF-8611 to four SFF-8482 SAS drives with integrated SATA 15P power over 1m

  • Typesas
  • Length1m
  • Specifications1m, sas, Enterprise Servers, Storage arrays, Cloud networks,
  • Featuressas, Enterprise Servers, Storage arrays, Cloud networks, 1m
  • Connect OCuLink SFF-8611 to four SAS drives via SFF-8482
  • Power SAS drives directly with integrated SATA 15-pin adapter
  • 1 metre length suits rack and server deployments
  • Supports 29-pin SAS connectors for enterprise storage arrays
  • New cable built for reliable data-intensive environments

OCuLink SFF-8611 4i breakout cable

This one-metre cable splits a single OCuLink SFF-8611 4i port into four SFF-8482 SAS 29-pin connectors for direct drive attachment. It targets server builders and storage integrators who need to connect multiple enterprise SAS drives to a host bus adapter or backplane without extra enclosures.

Integrated SATA 15-pin power adapter

A moulded SATA 15-pin power tail feeds the four SAS drives from a standard power-supply lead, removing the need for separate power cables. The fixed 1m length suits rack-mounted chassis where the controller sits close to the drive cage, keeping cable routing tidy and airflow clear.

Passive design for low-latency links

With no active components the assembly adds negligible latency and draws no power beyond what the drives consume. Signal integrity relies on the quality of the host OCuLink port and the SAS drives themselves, so thermal load and noise remain unchanged from a direct backplane connection.

Highlights

  • Connect OCuLink SFF-8611 to four SAS drives via SFF-8482
  • Power SAS drives directly with integrated SATA 15-pin adapter
  • 1 metre length suits rack and server deployments
  • Supports 29-pin SAS connectors for enterprise storage arrays
  • New cable built for reliable data-intensive environments

Specifications

BrandST-JY
ModelOSFF8611-4X82S29PST15P
Typesas
Length1m
Specifications1m, sas, Enterprise Servers, Storage arrays, Cloud networks, OSFF8611-4X82S29PST15P, ST-JY
Featuressas, Enterprise Servers, Storage arrays, Cloud networks, 1m

Questions about this item

What OCuLink interface does the SFF-8611 4i end use and what bandwidth does it carry?

The SFF-8611 4i connector carries four PCIe lanes; the practical throughput is limited by the PCIe generation of the host controller and the attached SAS drives.

What drive bay spacing and power connector clearance does the 1 m breakout cable need?

The cable splits into four SFF-8482 29-pin plugs plus a SATA 15-pin power lead; allow room for the 29-pin width and the SATA power header beside each drive bay.

How is the SATA 15-pin power adapter connected during installation and what step is often missed?

Plug the SATA 15-pin lead into a power-supply SATA cable before seating the four 29-pin SAS connectors; the missed step is powering the drives before the host detects them.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.