We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with USB Type-A plug and M.2 slot

Vszerda

Vszerda NVME to USB Adapter 10Gbps JMS583 4TB 2280 2260 2242 2230

SKU CH-3RW4-WQKCE

Connects M-key NVME drives sized 2230, 2242, 2260 or 2280 via USB 3.1 Gen 2 at 10 Gbps using a JMS583 chip with UASP and TRIM

  • Read large files quickly with 10 Gbps theoretical NVME speed
  • Install drives from 2230 to 2280 mm lengths on M-key slots
  • Reduce CPU overhead using JMS583 chip with UASP and TRIM
  • Support up to 4 TB capacity on Windows, Mac OS and Linux
  • Manage heat with copper-treated board and included silicone patch

Versatile M-Key NVMe Enclosure

This USB 3.1 Gen 2 adapter connects M-key NVMe SSDs in 2230, 2242, 2260 or 2280 form factors to a Type-A port. It supports drives up to 4TB and works with Windows, macOS and Linux without extra drivers. The JMS583 bridge enables UASP and TRIM for lower CPU overhead. B-key and B&M-key modules are not supported.

Sustained Transfer Behaviour

The JMS583 controller maintains the 10 Gbps link during long sequential reads and writes rather than throttling after a brief burst. UASP reduces protocol overhead so large-file copies stay closer to the 1000 MB/s reference figure. TRIM keeps write performance consistent when the drive fills up. Thermal design prevents the controller from becoming the bottleneck under continuous load.

Thermal and Power Profile

A copper rod on the PCBA and an included silicone pad draw heat away from the SSD and bridge chip. The assembly stays cool enough for handheld use during typical backup or cloning sessions. Bus power from the USB port is sufficient for most supported drives; no external supply is required. Operation is silent because there are no moving parts.

Highlights

  • Read large files quickly with 10 Gbps theoretical NVME speed
  • Install drives from 2230 to 2280 mm lengths on M-key slots
  • Reduce CPU overhead using JMS583 chip with UASP and TRIM
  • Support up to 4 TB capacity on Windows, Mac OS and Linux
  • Manage heat with copper-treated board and included silicone patch

Specifications

No published specifications for this item yet.

Questions about this item

Does the JMS583 chip stay cool during all-day transfers?

The board uses a copper-rod surface process and a silicone thermal pad to draw heat away from the NVME drive, keeping temperatures lower under sustained 10 Gbps workloads.

What SSD do I need before this adapter works?

You must supply an M-key NVME drive in 2230, 2242, 2260 or 2280 size; the package includes screws and a screwdriver for installation.

Will it slow down if I plug it into an older USB 3.0 port?

The adapter is backward compatible with USB 3.0 and 2.0 ports, though the 10 Gbps ceiling drops to the host port's maximum bandwidth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.