We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda NVMe to SATA Expansion Card M.2 to SATA Adapter Port Multiplier

SKU CH-0DBF-TVPAR

Converts an M.2 NVMe slot into multiple SATA 3 ports for internal SSDs

  • Adds multiple SATA ports from a single M.2 slot
  • Supports SATA 3 speeds for fast data transfer
  • Compatible with NGFF M Key interface
  • Enables storage expansion without extra controllers

M.2 to SATA adapter with port multiplier

This Vszerda expansion card converts an M.2 M-key slot into multiple SATA 3 ports for internal SSDs. It is designed for systems that need additional SATA connections from a single M.2 interface. The adapter uses a SATA controller and does not support NVMe or PCIe drives. It suits builders adding SATA storage where M.2 slots are available.

Port multiplier enables multiple drives

The bundled port multiplier controller allows several SATA SSDs to operate from one M.2 connection without extra host ports. This changes a single M.2 slot into a multi-drive SATA hub for capacity expansion. It will not work with NVMe drives and requires a motherboard M.2 slot wired for SATA signalling. Buyers needing NVMe passthrough or PCIe bifurcation cannot use this card.

Highlights

  • Adds multiple SATA ports from a single M.2 slot
  • Supports SATA 3 speeds for fast data transfer
  • Compatible with NGFF M Key interface
  • Enables storage expansion without extra controllers

Specifications

No published specifications for this item yet.

Questions about this item

Will the M.2 M-key slot on this adapter need any firmware updates or driver maintenance over time?

The adapter is a passive controller with no onboard firmware; it requires no updates or driver maintenance beyond the host system's standard SATA drivers.

What throughput limit appears first when running multiple SATA drives through the port multiplier under sustained load?

The single upstream SATA 3 link caps combined throughput at 6 Gb/s, so that interface saturates before any individual drive reaches its own limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.