Vszerda
Vszerda NF-SA-044 NGFF B+M PCIe to SATA 6.0Gbps dual-port adapter JMB582 2280
Adds two SATA 6.0 Gbps ports via an NGFF Key B+M slot using a JMB582 controller
- Conductorcopper
- Dual SATA 6.0Gbps ports connect two SSDs
- JMB582 controller enables native command queuing under load
- Key B+M 2280 slot fits vertical and horizontal layouts
- Hot-swap support lets you change drives without powering down
- Error reporting and sleep states protect data integrity
NGFF B+M adapter with dual SATA ports
This Vszerda NF-SA-044 adapter fits an NGFF Key B+M PCI Express slot and provides two SATA 3.0 connectors. It allows an SSD to be used as a system drive through the adapter. The card supports transfer rates of 6.0Gbps, 3.0Gbps and 1.5Gbps.
JMB582 controller enables 6.0Gbps throughput
The JMB582 main control chip drives both SATA 3.0 interfaces at up to 6.0Gbps. Native command queue technology maintains performance and stability under heavy load. Error reporting, recovery and correction are supported alongside partial and sleep power management states.
Vertical and horizontal connectors suit different
One SATA port is oriented vertically and the other horizontally for flexible routing. Hot swap and hot plug capabilities let drives be exchanged without shutting down the system. Copper conductors carry the signals between the slot and the drives.
Highlights
- Dual SATA 6.0Gbps ports connect two SSDs
- JMB582 controller enables native command queuing under load
- Key B+M 2280 slot fits vertical and horizontal layouts
- Hot-swap support lets you change drives without powering down
- Error reporting and sleep states protect data integrity
Specifications
| Brand | Vszerda |
|---|---|
| Model | NF-SA-044 |
| Conductor | copper |
Questions about this item
What does the 6.0 Gbps rating mean when the adapter is installed in a system?
The adapter connects two SATA 3.0 drives at up to 6.0 Gbps each, with backward compatibility to 3.0 Gbps and 1.5 Gbps devices.
Which slot standard does the NF-SA-044 use and what throughput does it provide?
It plugs into an NGFF Key B+M PCI Express slot using the JMB582 controller for dual SATA 3.0 ports.
What physical space and orientation do the two SATA ports need?
One port is vertical and one horizontal, both SATA 3.0, so the board fits 2280-length M.2 slots with clearance for both connector directions.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



