We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with two M.2 slots and SATA connector

Vszerda

Vszerda mSATA to SATA Adapter B Key M.2 2 in 1 SSD HDD Riser

SKU CH-QT18-NC0NC

Converts mSATA and B-key M.2 SATA drives to standard SATA for desktop or laptop use

  • Converts mSATA SSDs to standard SATA interface
  • Supports B-key M.2 SATA drives for wider compatibility
  • 2-in-1 riser design fits both mSATA and M.2 form factors
  • Enables USB connection for external drive access

mSATA and M.2 B-Key SATA Adapter

This adapter converts an mSATA or M.2 B-key SATA SSD to a standard 2.5-inch SATA form factor. It accepts one drive at a time and requires no extra drivers. The board is suited to upgrading older laptops or desktops that only have a regular SATA port available.

Passive Operation and Low Power

The adapter draws power directly from the SATA connection and has no active cooling or onboard regulator. It adds negligible heat and produces no audible noise during normal use. Total power consumption matches that of the installed drive alone.

Highlights

  • Converts mSATA SSDs to standard SATA interface
  • Supports B-key M.2 SATA drives for wider compatibility
  • 2-in-1 riser design fits both mSATA and M.2 form factors
  • Enables USB connection for external drive access

Specifications

No published specifications for this item yet.

Questions about this item

How do I install an mSATA or B-key M.2 SATA drive into the Vszerda 2-in-1 adapter?

Align the drive's notches with the correct slot — mSATA or the B-key M.2 socket — press it in flat, then secure it with the retaining screw; the step people miss is forgetting that screw, leaving the drive loose and unreadable.

What maintenance or replacement will the Vszerda mSATA to SATA adapter need over time?

The adapter itself is passive and has no wearing parts; only the mSATA or B-key M.2 SATA drive inserted into it may eventually require replacement after heavy write cycles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.