We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with gold connectors and 40 pin ZIF socket

Vszerda

Vszerda mSATA to CE ZIF Riser Board Adapter 40pin 1.8inch Converter Card

SKU CH-DZRR-0XVRJ

Converts a mini SATA PCIe SSD to a 40-pin 1.8-inch ZIF CE interface

  • Connect mSATA SSDs to 40-pin 1.8-inch ZIF slots
  • Enables use of mini SATA PCIe drives in CE ZIF systems
  • Adapter board converts mSATA interface to 40-pin ZIF CE connector
  • New condition ensures reliable connection for storage upgrades

mSATA to CE ZIF Adapter

This Vszerda adapter converts an mSATA PCIe SSD to a 40-pin 1.8-inch ZIF CE connector. It suits builders upgrading legacy industrial or embedded systems that still use the ZIF interface. The riser board layout keeps the mSATA drive aligned with the target socket. No extra cables are required for the conversion.

40-pin ZIF connector fit

The single deciding specification is the 40-pin 1.8-inch ZIF CE connector on the output side. If the host device uses a different pin count or pitch, this adapter will not mate. Buyers who need a standard SATA or M.2 interface should look elsewhere. Verify the exact socket type before ordering.

Highlights

  • Connect mSATA SSDs to 40-pin 1.8-inch ZIF slots
  • Enables use of mini SATA PCIe drives in CE ZIF systems
  • Adapter board converts mSATA interface to 40-pin ZIF CE connector
  • New condition ensures reliable connection for storage upgrades

Specifications

No published specifications for this item yet.

Questions about this item

Will a 40-pin 1.8-inch ZIF SSD work at full SATA speed through this adapter?

The board passes the native SATA signal from an mSATA drive to the 40-pin ZIF connector, so the drive runs at its rated SATA throughput.

Does the 40-pin ZIF interface limit the drive to a lower transfer rate than standard SATA?

The ZIF connector carries the same SATA lanes, so the practical ceiling remains the drive's own SATA revision, not the adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.