We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic caddy with SATA 13 pin connector for 9.5mm optical bay

Vszerda

Vszerda mSATA NGFF B/M-Key to Slimline SATA 13Pin 9.5mm Caddy

SKU CH-P28Q-9TA5X

Adds a second SATA drive to a 9.5 mm optical bay using an mSATA or NGFF B/M-key SSD with a selector switch

  • Add a second drive without cables by fitting this caddy into a 9.5 mm optical bay
  • Supports mSATA and NGFF B-key or B/M-key SSDs with a physical switch to select between them
  • Enables dual-boot configurations with a second operating system on the added drive
  • Works as a direct SATA replacement for the primary hard drive with plug-and-play operation
  • Tool-free installation by sliding the drive into the connector and locking it in place

Laptop optical-bay storage upgrade

This caddy replaces a 9.5mm CD or DVD drive with a second SATA solid-state drive. It accepts either an mSATA module or an NGFF B-key or B/M-key module, selected by a physical switch on the adapter. No cables, external power or driver installation are required. The drive appears to the system exactly like the primary internal disk.

Adds a second drive without removing the original

The adapter fits into the existing slimline 13-pin optical bay, so the factory storage stays in place. Users gain extra capacity for backups, a separate operating system or a dual-boot configuration. Only one module type — mSATA or NGFF — can be active at a time; the switch must be set before installation. M-key NGFF modules are not supported.

Sustained operation matches the primary drive

Once seated and latched, the SSD runs at the host SATA link speed with no thermal throttling reported for typical laptop workloads. The all-metal frame conducts heat into the chassis, and the plug-and-play connection remains stable through sleep, wake and reboot cycles. Performance is consistent with a drive installed in the main storage slot.

Highlights

  • Add a second drive without cables by fitting this caddy into a 9.5 mm optical bay
  • Supports mSATA and NGFF B-key or B/M-key SSDs with a physical switch to select between them
  • Enables dual-boot configurations with a second operating system on the added drive
  • Works as a direct SATA replacement for the primary hard drive with plug-and-play operation
  • Tool-free installation by sliding the drive into the connector and locking it in place

Specifications

No published specifications for this item yet.

Questions about this item

Will this caddy fit a 9.5mm optical bay?

Yes, it is built for a 9.5mm universal laptop CD/DVD-ROM bay.

How do I install an NGFF SSD and what step is often missed?

Insert the drive at an angle until it locks, lower the retaining latch, then set the selector switch to NGFF mode before closing the bay.

Which drive types can I swap in later?

You can use an mSATA SSD or a B-key or B/M-key NGFF SSD; M-key NGFF drives are not compatible.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.