We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 14 inch Molex 4 pin power extension cable 18AWG

Vszerda

Vszerda Molex 4-pin power extension cable 14 inches 18AWG

SKU CH-EFFC-ZFJWY

Extends a Molex 4-pin power connection by 14 inches using 18AWG copper conductors

  • Extends PSU reach by 14 inches for flexible builds
  • 18AWG copper conductors deliver reliable power to drives
  • Female-to-male Molex 4-pin connects directly to existing cables
  • 12 V and 5 V lines supported for IDE devices
  • 14-inch length keeps internal routing tidy

Power extension for Molex devices

This 14-inch cable extends a standard 4-pin Molex power lead so that drives or peripherals can reach the power supply in larger cases. It is aimed at builders who need a little extra length when routing power to hard drives, optical drives or fan controllers.

Voltage and gauge limits

The conductors are 18AWG copper rated for the 12 V and 5 V rails carried by the Molex interface. The wire gauge sets a practical limit on current, so the cable is suitable for typical drives and low-power accessories but not for high-draw devices that would exceed the conductor capacity.

Female-to-male layout and daily use

A Molex 4-pin female connector on one end mates with the power supply lead, while a male connector on the other end plugs into the device. The 14-inch length adds flexibility for cable management without leaving large coils, and the straight connectors keep the profile low in tight drive bays.

Highlights

  • Extends PSU reach by 14 inches for flexible builds
  • 18AWG copper conductors deliver reliable power to drives
  • Female-to-male Molex 4-pin connects directly to existing cables
  • 12 V and 5 V lines supported for IDE devices
  • 14-inch length keeps internal routing tidy

Specifications

No published specifications for this item yet.

Questions about this item

Which Molex 4-pin extension length should I pick for my build?

This cable adds 14 inches between your PSU and the device, giving extra reach without excess slack.

What does the 18 AWG rating mean for everyday use?

18 AWG copper conductors handle the 12 V and 5 V lines reliably for hard drives, optical drives and similar Molex-powered devices.

Does the Molex 4-pin interface limit the power I can draw?

The male-to-female Molex 4-pin connectors pass the standard 12 V and 5 V rails, so the cable supports any device designed for that connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.