Vszerda
Vszerda Mini SAS HD SFF-8088 68P Male to 2× SFF-8644 36P Male Cable 100CM
Connects one SFF-8088 68-pin port to two SFF-8644 36-pin ports for 12 Gbps per lane external SAS links
- TypeMini SAS
- ColorMulticolored
- Length18
- Connector DetailMini Sas Hd
- Terminal GenderMale-to-Male
- SpecificationsMini SAS
- 12Gbps per lane for fast external SAS transfers
- SFF-8088 68-pin to dual SFF-8644 36-pin splits one port into two
- Advanced EMI shielding protects signal integrity in noisy racks
- Secure locking connectors prevent accidental disconnects under load
- 100cm length fits high-density rack cable routing
External SAS connectivity
This Mini SAS HD cable bridges an SFF-8088 68-pin male port to two SFF-8644 36-pin male ports for enterprise storage links. It targets administrators wiring external RAID enclosures or JBODs to host bus adapters in rackmount servers. The 100 cm length suits typical rack-to-rack runs without excess slack. Secure locking connectors resist vibration in dense chassis.
12 Gbps per lane headroom
Each of the eight lanes carries up to 12 Gbps, giving aggregate bandwidth for multi-drive arrays and backup workloads. The Y-split design fans out one controller port to two enclosures, doubling device count per HBA slot. Performance scales with the slowest attached device; older 6 Gbps drives will not saturate the link. Cable length and EMI shielding preserve signal quality at the rated speed.
SFF-8088 and SFF-8644 limits
The SFF-8088 plug is defined for external copper SAS up to the stated lane rate; longer runs or passive extensions beyond specification increase error rates. SFF-8644 receptacles on target enclosures must match the 36-pin pinout; mismatched internal connectors will not mate. This cable carries SAS protocol only and does not support other interfaces.
Highlights
- 12Gbps per lane for fast external SAS transfers
- SFF-8088 68-pin to dual SFF-8644 36-pin splits one port into two
- Advanced EMI shielding protects signal integrity in noisy racks
- Secure locking connectors prevent accidental disconnects under load
- 100cm length fits high-density rack cable routing
Specifications
| Brand | ST-JY |
|---|---|
| Model | MNSA8088-8X68PM-2P8644-36PM |
| Type | Mini SAS |
| Color | Multicolored |
| Length | 18 |
| Connector Detail | Mini Sas Hd |
| Terminal Gender | Male-to-Male |
| Specifications | Mini SAS |
| Shielding | High-speed data transfer, enhanced EMI shielding, secure locking connectors |
| Features | High-speed data transfer, enhanced EMI shielding, secure locking connectors |
Questions about this item
Will the SFF-8088 68-pin end connect to my existing SAS controller?
The cable end is a Mini SAS HD SFF-8088 68-pin male connector that plugs into any compatible external SAS controller port.
How can I verify the 12Gbps per lane link is active after connecting the SFF-8644 ends?
Check the controller BIOS or operating-system SAS topology view; each lane should report a negotiated 12Gbps link speed with no errors.
Does the box include any brackets or adapters for the two SFF-8644 36-pin male connectors?
Only the 100cm cable with one SFF-8088 68-pin male and two SFF-8644 36-pin male connectors is supplied; no brackets or extra adapters are included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114993BTC
In stock
