We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda left-angled Micro USB OTG to USB-B printer cable 60cm

Vszerda

Vszerda Micro USB OTG 90° Left Angled to USB Type B Printer Cable 60cm

SKU CH-VXF7-XSJEW

Connects Micro USB OTG devices to USB Type B peripherals with a left-angled 90 degree plug and 60cm length

  • Left-angled Micro USB OTG reduces strain on tight ports
  • 90-degree connector routes cable neatly behind devices
  • Standard USB Type B plug fits printers, scanners and hard drives
  • OTG host function lets mobile devices drive peripherals directly
  • 60 cm length keeps desk tidy without excess slack

Left-angled OTG printer cable

This 60 cm cable connects a Micro USB OTG port to a standard USB Type B printer, scanner or external hard disk. The 90 degree left-angled plug reduces strain in tight spaces. It is aimed at users who need a direct link between a mobile or compact host and legacy USB B peripherals.

Thermals noise and power

The cable is a passive copper assembly with no active electronics, so it generates no measurable heat and draws no power of its own. Operation is completely silent because there are no fans or moving parts. Power delivery depends entirely on the host device and the connected peripheral.

Build quality and daily use

The left-angled Micro USB OTG male connector fits snugly against the host device, keeping the cable out of the way during use. The straight USB Type B male end mates securely with printer, scanner or hard-disk ports. A driver may be required for the attached device, so verify software availability before connecting.

Highlights

  • Left-angled Micro USB OTG reduces strain on tight ports
  • 90-degree connector routes cable neatly behind devices
  • Standard USB Type B plug fits printers, scanners and hard drives
  • OTG host function lets mobile devices drive peripherals directly
  • 60 cm length keeps desk tidy without excess slack

Specifications

No published specifications for this item yet.

Questions about this item

How do I plug in the left-angled 90° Micro USB OTG connector without forcing it?

Align the wide side of the Micro USB OTG plug with the port, then press straight in; the 90° left angle sits flush against the device so the cable runs parallel to the edge.

Will the Standard B Type male connector wear out from repeated unplugging?

The Standard B Type male end is rated for typical office connect-disconnect cycles; if the gold-plated pins dull or the latch loosens, replace the cable.

At what length does signal loss appear when printing large files?

At 60 cm the USB 2.0 signal stays within spec for bulk transfers; longer runs would need an active repeater cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.