Vszerda MCIO SFF-8654 SAS 4.0 74Pin Male to PCI-E Slimline 8i 74Pin Male PCI-E 5.0 Extender Cable 1.15ft

High-Speed SAS 4.0 MCIO Extender Cable

This 1.15ft cable connects a 74-pin male MCIO Slimline 8i interface to a 74-pin male SFF-8654 SAS 4.0 connector. It supports data transfer rates up to 24 Gbps for high-performance storage and server links. The male-to-male design enables direct device-to-device or board-to-board connections in data-centre and networking environments. Builders integrating PCIe 5.0 and SAS 4.0 equipment use this extender for flexible signal routing.

Direct Board-Level Signal Routing

The MCIO Mini Cool Edge IO assembly provides a high-performing channel without an intermediate backplane or adapter. It carries SAS, PCIe, Ethernet and other protocols across the same 74-pin interface, allowing cable-to-board and card-to-board topologies such as chip-to-chip, chip-to-module or card-edge configurations. The black serial cable arrives ready to plug in, so installers can extend dense I/O connections inside chassis or between rack units without additional converters.

Verify Connector Gender and Protocol Match

Confirm both endpoints require a 74-pin male MCIO Slimline 8i plug and a 74-pin male SFF-8654 receptacle before ordering. The 50 cm length suits close-proximity links; longer runs need a different cable. Ensure the host and target devices negotiate SAS 4.0 or PCIe 5.0 signalling at 24 Gbps, as the cable does not perform protocol conversion. Buyers needing female connectors, alternative pin counts or lower-speed SAS 3.0 links must select a different part.