Vszerda
Vszerda MCIO SFF-8654 8i PCIe 5.0 to 8x SATA 7P Right Female Cable 80cm
Connects an MCIO SFF-8654 8i port to eight right-angle SATA drives at 16 Gbps over 80 cm
- TypeSAS
- Length18
- Connector DetailMcio
- Terminal GenderMale-to-Female
- Speed16 gigabits_per_second
- FeaturesHigh-speed transfer, right-angle SATA connectors
- Connect up to eight SATA drives from one MCIO 8654 port
- Right-angle SATA plugs ease routing in tight server chassis
- 16 Gbit/s bandwidth satisfies high-throughput storage workloads
- 80 cm length reaches drives across full-depth enclosures
- Robust build maintains signal integrity in demanding environments
Eight-drive SATA breakout cable
This cable adapts a single MCIO SFF-8654 8i port into eight SATA 7-pin right-angle female connectors. It suits server and workstation builders who need to attach multiple SATA hard drives or SSDs to a modern backplane or controller. The 80 cm length gives routing flexibility inside 2 U and larger chassis. No active components are required for the conversion.
Passive thermals and power profile
As a passive copper assembly the cable adds no fans, pumps or active circuitry, so it contributes zero acoustic noise and negligible heat. Power draw is limited to the signal-level consumption of the PCIe 5.0 lane drivers at the host side. The right-angle SATA ends reduce cable stress and help maintain airflow around dense drive bays.
Sustained 16 Gbit/s throughput
The harness is rated for 16 Gbit/s per lane, matching PCIe 4.0 electrical performance across all eight channels simultaneously. In continuous read or write workloads spanning multiple drives the aggregate bandwidth remains stable because no protocol conversion or buffering occurs. Builders who require PCIe 5.0 signalling rates or active signal retiming should verify controller compatibility before deployment.
Highlights
- Connect up to eight SATA drives from one MCIO 8654 port
- Right-angle SATA plugs ease routing in tight server chassis
- 16 Gbit/s bandwidth satisfies high-throughput storage workloads
- 80 cm length reaches drives across full-depth enclosures
- Robust build maintains signal integrity in demanding environments
Specifications
| Brand | ST-JY |
|---|---|
| Model | MCIOSFF8654-8X7P-FR |
| Type | SAS |
| Length | 18 |
| Connector Detail | Mcio |
| Terminal Gender | Male-to-Female |
| Speed | 16 gigabits_per_second |
| Features | High-speed transfer, right-angle SATA connectors |
Questions about this item
How do I install the MCIO SFF-8654 8i end and which way do the right-angle SATA 7P connectors face?
Plug the male MCIO SFF-8654 8i connector into the matching PCIe 5.0 port on the motherboard or controller; the eight SATA 7P right-angle female connectors bend to the right so route cables toward the drive bays before latching each drive.
What maintenance or replacement will the cable assembly need over time?
The cable is passive with no moving parts, so no scheduled maintenance is required; replace the assembly only if a connector latch breaks or the 80 cm cable sheath shows physical damage.
What limit appears first under sustained heavy I/O across all eight drives?
The 16 Gb/s aggregate link of the MCIO SFF-8654 8i interface caps total throughput, so sustained transfers from all eight SATA drives share that bandwidth ceiling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011546BTC
In stock
