Vszerda
Vszerda M710s 4Pin to 2 SATA 15pin + 6pin internal power cable
Converts a 4-pin connector to two SATA 15-pin and one 6-pin for powering drives
- Connects two SATA drives from one 4-pin source
- 15-pin SATA power plugs for drive compatibility
- 6-pin connector supports CD-ROM interface
- New cable ready for M710s system installation
M710s 4-Pin to Dual SATA Power Cable
This internal power cable connects a single 4-pin peripheral connector to two SATA 15-pin power plugs plus one 6-pin connector. It is built for PC builders who need to power multiple SATA drives or a CD-ROM drive from one legacy output.
Capacity and headroom
The cable delivers enough leads for two SATA devices and one 6-pin device at once. It runs out when a build requires more than two SATA power connections or lacks a free 4-pin source.
Highlights
- Connects two SATA drives from one 4-pin source
- 15-pin SATA power plugs for drive compatibility
- 6-pin connector supports CD-ROM interface
- New cable ready for M710s system installation
Specifications
No published specifications for this item yet.
Questions about this item
Will the 4-pin connector fit the power header on my older M710s motherboard?
Yes, the 4-pin plug is designed for the M710s board header, letting you keep that system while adding drives.
How can I verify the 15-pin SATA power leads are delivering power after installation?
Connect a SATA drive; if it spins up and appears in BIOS, the 15-pin connectors are working correctly.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



