We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda M-Key NVME SSD to PCI-E 3.0 Adapter Green

SKU CH-6YTF-S83HP

Converts M-key NVME SSDs to PCI-E 3.0 x4, supports 2230 to 2280 lengths, driver-free

  • Converts M-key M.2 SSD to PCI-E 3.0 x4 slot
  • Maintains original SSD speed without performance loss
  • Fits 2230 2242 2260 2280 form factors
  • Works driver-free on Windows 10 or later
  • Requires Z97 or newer motherboard with PCI-E x4 x8 x16

M-Key NVMe to PCIe 3.0 Adapter

This Vszerda adapter converts an M-Key M.2 NVMe SSD to a PCI Express 3.0 x4, x8 or x16 slot. It supports 2230, 2242, 2260 and 2280 form factors without changing drive speed or properties. The card is intended for desktop builders adding NVMe storage to a motherboard with a compatible PCIe slot.

Driver-Free Operation and OS Visibility

The adapter is transparent to the operating system and requires no software drivers. Windows 10 or later will detect the SSD once the OS loads. Ordinary systems cannot see the drive in BIOS, so booting from the SSD is only possible if the motherboard BIOS specifically supports PCIe device booting.

Slot Compatibility and Chipset Limits

Installation requires a motherboard with a Z97 or later chipset and a free PCIe x4, x8 or x16 slot. AMD chipset motherboards are not recommended. Chipsets below the 9 series cannot use PCIe x4 drives such as the PM951, SM951 or PM950. Buyers without a compatible Intel platform or PCIe boot support cannot use this adapter.

Highlights

  • Converts M-key M.2 SSD to PCI-E 3.0 x4 slot
  • Maintains original SSD speed without performance loss
  • Fits 2230 2242 2260 2280 form factors
  • Works driver-free on Windows 10 or later
  • Requires Z97 or newer motherboard with PCI-E x4 x8 x16

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter board itself require any firmware updates or driver maintenance over time?

The adapter is transparent to the operating system and does not require any software drivers, so no firmware or driver maintenance is needed for the board itself.

What limits the maximum throughput when the SSD runs at full speed for long periods?

The adapter uses a PCI-E 3.0 x4 electrical interface, so sustained throughput is capped by the PCI-E 3.0 x4 lane bandwidth.

Does the adapter generate noticeable heat or need extra cooling when used continuously?

The adapter is a passive riser card with no active components, so it produces minimal heat and does not require additional cooling during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.