We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M.2 slot and USB-A plug

Vszerda

Vszerda M.2 to USB 3.1 Adapter NVMe SATA 10Gbps

SKU CH-2R32-PV5K9

Connects M.2 NVMe and SATA SSDs to USB 3.1 Type-A at 10Gbps with Realtek 9210B chipset

  • Dual-protocol support fits NVMe and SATA M.2 drives
  • Realtek RTL9210B chip delivers 10Gbps over USB 3.1 Gen2
  • Open-board design accepts 2242 2260 2280 form factors
  • Plug-and-play hot-swap works without drivers on Windows XP through 10
  • Includes silicone pad and screwdriver for quick SSD swaps

M.2 SSD adapter for USB 3.1 Type-A

The Vszerda adapter connects M.2 SSDs to a USB 3.1 Type-A port. It supports both NVMe PCIe and SATA-based B+M key drives in 2242, 2260 and 2280 form factors. The Realtek 9210B chipset enables up to 10Gbps transfer on USB 3.1 and 5Gbps on USB 3.0. Hot-plug operation requires no drivers on Windows XP through 10.

Bare PCB with silicone pad and screw

The board measures 115 by 25 by 6 millimetres and ships without an enclosure cover. A silicone pad and screwdriver are included for securing 42, 60 or 80 millimetre drives. Direct USB-A plug-in means no cable is needed, but the exposed PCB offers no physical protection for the drive during transport or daily handling.

Replaces internal-only M.2 slots for external access

The adapter turns an internal M.2 slot into a removable USB drive, useful for data recovery, cloning or moving large files between systems. It is not suited for users who need a rugged enclosure, USB-C connectivity or hardware encryption. Builders wanting to boot from the external SSD should verify BIOS support for USB-attached NVMe.

Highlights

  • Dual-protocol support fits NVMe and SATA M.2 drives
  • Realtek RTL9210B chip delivers 10Gbps over USB 3.1 Gen2
  • Open-board design accepts 2242 2260 2280 form factors
  • Plug-and-play hot-swap works without drivers on Windows XP through 10
  • Includes silicone pad and screwdriver for quick SSD swaps

Specifications

No published specifications for this item yet.

Questions about this item

What real-world speed does the USB 3.1 Gen 2 interface deliver with this adapter?

The Realtek 9210B chipset provides up to 10Gbps over USB 3.1 Gen 2 Type-A; if the host port is USB 3.0 the link drops to 5Gbps.

Which M.2 form factors and key types fit the onboard M-key socket?

The board accepts 2242, 2260 and 2280 modules — both PCIe NVMe M-key and SATA-based B+M-key or B-key drives.

How is the drive secured and what step is often missed?

Insert the SSD at an angle into the M-key slot, then fasten the supplied screw into the matching standoff (22, 42, 60 or 80 mm); many users forget the screw and the drive disconnects under vibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.