We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot SATA connector and SFF-8654 port

Vszerda

Vszerda M.2 SATA SSD to SATA + NVME to SFF-8654 Adapter 22Pin

SKU CH-5TZA-PHV18

Connects M.2 SATA SSDs to SATA and M.2 NVMe drives to SFF-8654 using a 22-pin interface

  • Connect M.2 SATA drives via standard SATA
  • Convert M.2 NVMe drives to SFF-8654 interface
  • 22-pin connector fits desktop mainboards directly
  • Supports both SATA and NVMe M.2 form factors

M.2 SATA and NVME adapter for desktop boards

This adapter converts an M.2 SATA SSD to a standard SATA connection and an M.2 NVME SSD to an SFF-8654 interface using a 22-pin layout. It fits into a desktop mainboard to add solid-state storage without occupying a drive bay. Builders can mix SATA and NVME drives on a single expansion card.

Sustained operation stays within SATA

The card contains no active cooling or power regulation, so throughput depends on the host controller and the drive's own thermal behaviour. Under continuous heavy writes the NVME device may throttle if the chassis airflow is limited, while the SATA path remains steady at its rated speed. Users needing guaranteed write performance should verify their case ventilation.

Highlights

  • Connect M.2 SATA drives via standard SATA
  • Convert M.2 NVMe drives to SFF-8654 interface
  • 22-pin connector fits desktop mainboards directly
  • Supports both SATA and NVMe M.2 form factors

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter generate noticeable heat or noise when running an NVMe drive all day?

The adapter is a passive circuit board with no fan or active components, so it adds no audible noise and negligible heat beyond the drive itself.

What must my motherboard already provide for the SFF-8654 side to function?

Your board needs a free SFF-8654 port wired for NVMe signalling and a standard 22-pin SATA connector for the SATA drive path.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.