We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board adapter with gold edge connector and M.2 slot

Vszerda

Vszerda M.2 SATA NGFF B+M Key to NVME M-Key Adapter JMB582 2230/2242/2260/2280

SKU CH-8N37-7TPJ0

Converts a SATA NGFF B+M key SSD to an NVME M-key slot for desktop motherboards using a JMB582 chipset

  • Converts SATA NGFF SSD to NVME M-key slot using JMB582 chipset
  • Fits 2230 2242 2260 2280 22110 form factors on desktop motherboards
  • NGFF B+M key slot at 6mm height prevents laptop M-key installation
  • Compact 22 x 110 mm PCBA weighs only 8 grams for tight builds
  • PCI hardware interface enables SATA SSD use in NVME M-key host

Adapter Purpose

The Vszerda adapter lets you install a SATA NGFF B+M key SSD into a desktop motherboard PCI-E NVME M-key slot. It accepts drive lengths 2230, 2242, 2260 and 2280, so owners of older SATA M.2 modules can reuse them on newer platforms.

Chipset and Form Factor

The on-board JMB582 controller bridges the SATA signal to the NVME host interface without adding proprietary software. The 22 by 110 mm PCBA sits at a 6 mm profile, which clears standard desktop M-key sockets but prevents fitment in laptop M-key slots.

Suitable Builds and Limits

Builders migrating a SATA NGFF drive to a desktop M-key slot will find this card a direct fit. It does not convert PCIe NVMe drives, nor does it work in laptop M-key sockets, so buyers needing those configurations should look elsewhere.

Highlights

  • Converts SATA NGFF SSD to NVME M-key slot using JMB582 chipset
  • Fits 2230 2242 2260 2280 22110 form factors on desktop motherboards
  • NGFF B+M key slot at 6mm height prevents laptop M-key installation
  • Compact 22 x 110 mm PCBA weighs only 8 grams for tight builds
  • PCI hardware interface enables SATA SSD use in NVME M-key host

Specifications

No published specifications for this item yet.

Questions about this item

Will the JMB582 chipset on this adapter need a firmware update or replacement after long-term use?

The JMB582 bridge chip is a fixed hardware component with no user-serviceable firmware; the adapter itself has no moving parts and requires no scheduled maintenance.

What length of SATA NGFF SSD does the 22 mm by 110 mm PCB limit me to?

The board accepts 2230, 2242, 2260 and 2280 form factors; the 110 mm length stops short of a 22110 drive.

How much extra heat does the JMB582 add when the adapter runs all day in a desktop?

The JMB582 bridge draws very little power and the bare 22 by 110 mm PCB dissipates heat passively; no active cooling is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.