We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black MCIO x8 to dual U.2 NVMe cable with 15-pin power, 100 cm

Vszerda

Vszerda LLS-CB-1MC2UT-02 PCIe 4.0 MCIO x8 to 2×SFF-8639 U.2 NVMe Cable 100 cm

SKU CH-FPWZ-21AB2

Connects one MCIO x8 host to two U.2 NVMe SSDs with integrated 15-pin power at PCIe 4.0 speeds up to 128 Gb/s over 100 cm

  • TypePCIe 4.0 \ SAS
  • ColorBlack
  • Length39.4
  • Terminal GenderMale-to-Female
  • Speed128 gigabits_per_second
  • PCIe 4.0 delivers 128 Gb/s throughput via 16 GT/s 8-lane signalling
  • Dual SFF-8639 U.2 ports connect two NVMe SSDs from one MCIO x8 link
  • 74-pin MCIO connector meets SFF-TA-1016 and SAS standards for enterprise reliability
  • Works with PCIe 3.0 systems for backward-compatible deployment
  • 15-pin SATA power cable supplies stable power to both U.2 drives

MCIO x8 to Dual U.2 NVMe Cable

This Vszerda cable connects a PCIe 4.0 MCIO x8 host port to two SFF-8639 U.2 NVMe drives. The 100 cm length suits full-tower server or workstation chassis where drives sit far from the backplane. It carries both data and 15-pin SATA power to each SSD.

Suits dual-drive U.2 arrays.

Builders adding a pair of enterprise U.2 NVMe SSDs to a compatible HBA or motherboard MCIO connector will use this. It does not fit M.2 sockets, SATA-only backplanes, or systems lacking a 74-pin MCIO x8 interface. Buyers needing only one drive or a different connector should look elsewhere.

PCIe 4.0 x8 at 128 Gbit/s

The link runs at 16 GT/s per lane for an aggregate 128 gigabits per second across eight lanes. It complies with SFF-TA-1016 and SAS standards and drops to PCIe 3.0 speeds when installed in older platforms.

Highlights

  • PCIe 4.0 delivers 128 Gb/s throughput via 16 GT/s 8-lane signalling
  • Dual SFF-8639 U.2 ports connect two NVMe SSDs from one MCIO x8 link
  • 74-pin MCIO connector meets SFF-TA-1016 and SAS standards for enterprise reliability
  • Works with PCIe 3.0 systems for backward-compatible deployment
  • 15-pin SATA power cable supplies stable power to both U.2 drives

Specifications

BrandVszerda
ModelLLS-CB-1MC2UT-02
TypePCIe 4.0 \ SAS
ColorBlack
Length39.4
Terminal GenderMale-to-Female
Speed128 gigabits_per_second

Questions about this item

What bandwidth does the PCIe 4.0 MCIO x8 interface deliver?

The cable supports PCIe 4.0 at 16 GT/s across eight lanes, reaching 128 gigabits per second.

What physical connectors and power lead does the cable require to fit?

One 74-pin MCIO x8 SFF-TA-1016 plug, two 68-pin SFF-8639 U.2 receptacles and a 15-pin SATA power cable.

How is the cable installed and which step is often missed?

Connect the MCIO end to the motherboard, attach both U.2 drives, then plug the 15-pin SATA power lead — the power lead is the step most commonly forgotten.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.