We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
L-shaped PCIe 3.0 x16 riser with 20 cm ribbon cable and 90 degree connector

Vszerda

Vszerda L-shaped 90° PCIe 3.0 x16 riser 20 cm

SKU CH-05AV-SG0SA

L-shaped 90° PCIe 3.0 x16 riser with a 20 cm ribbon cable extends a graphics card away from the motherboard for flexible mounting in tight cases or mining rigs

  • Vertical 90° connector fits graphics cards in tight spaces
  • 20 cm ribbon cable allows flexible GPU positioning
  • PCIe 3.0 x16 interface maintains full bandwidth
  • Gold-plated contacts ensure reliable signal integrity
  • Foiled cable design reduces electromagnetic interference

L-shaped 90° PCIe 3.0 x16 riser

This flexible ribbon cable extends a PCI Express x16 slot by 20 cm with a vertical 90 degree connector. It allows a graphics card to be mounted in a different orientation or position inside the chassis. The 24 cm total length suits compact builds or mining frames where the card cannot sit directly above the slot. Gold-plated contacts and foil shielding maintain signal quality at PCIe 3.0 speeds.

Replaces a straight x16 slot connection

Use this riser when the graphics card blocks adjacent slots, exceeds case clearance, or needs vertical mounting for airflow. The jump is worth it if the motherboard layout forces the card into a cramped space or if a mining rig requires multiple cards spaced apart. The ribbon design routes around obstacles that a rigid board cannot clear.

Check slot spacing and cable routing

Verify the motherboard has a free x16 slot and that the 20 cm ribbon can reach the chosen mounting point without sharp bends. Ensure the 90 degree connector orientation matches the card bracket and case layout. Confirm the power supply cables can still reach the graphics card once it is relocated. The foil shielding helps EMI but avoid running the ribbon parallel to high-current wires.

Highlights

  • Vertical 90° connector fits graphics cards in tight spaces
  • 20 cm ribbon cable allows flexible GPU positioning
  • PCIe 3.0 x16 interface maintains full bandwidth
  • Gold-plated contacts ensure reliable signal integrity
  • Foiled cable design reduces electromagnetic interference

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 90-degree connector need behind the graphics card?

The vertical 90-degree connector adds about 24 cm total length, so allow at least that much depth behind the card for the riser to bend without stress.

Which end plugs into the motherboard and which end receives the graphics card during installation?

The male PCIe x16 plug goes into the motherboard slot; the female PCIe x16 socket accepts the graphics card. Connect the motherboard end first, then seat the card into the riser socket.

Will the gold-plated contacts on this 20 cm riser need periodic cleaning or replacement?

Gold-plated terminals resist oxidation, so no scheduled cleaning is required; only reseat the connectors if you experience intermittent contact after moving the build.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.