We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 60mm black cooling fan with maglev bearing and two-pin connector

Vszerda

Vszerda kde2406phv2 60mm 24V 1.9W 4300rpm 21CFM 36dB 42g gadget

SKU CH-TDKX-ZR38V MPN kde2406phv2

A 60 mm maglev axial fan moves 21 CFM at 4300 rpm with 36 dB noise on a 24 V supply

  • Efficient 24 V operation at just 1.9 W
  • High 4300 rpm speed moves 21 CFM of air
  • Quiet 36 dB noise level suits noise-sensitive builds
  • Compact 60 × 60 × 15 mm frame fits tight spaces
  • Light 42 g weight eases installation in portable devices

Purpose and fit

The Vszerda kde2406phv2 is a 60 mm axial cooling fan that runs on 24 V DC and draws 0.08 A. It suits industrial IPC chassis or custom enclosures that need a compact airflow source with a standard two-pin motherboard header.

Build and daily use

The frame measures 60 by 60 by 15 mm and weighs 42 grams, so it fits tight mounting grids without adding mass. A maglev bearing keeps friction low while the two-pin plug lets the board control speed directly.

Interface limits

At 4300 rpm the fan moves 21 CFM against 0.18 inches of water pressure at 36 dBA. The fixed 24 V supply and two-pin connection mean no PWM regulation or tachometer feedback is available.

Highlights

  • Efficient 24 V operation at just 1.9 W
  • High 4300 rpm speed moves 21 CFM of air
  • Quiet 36 dB noise level suits noise-sensitive builds
  • Compact 60 × 60 × 15 mm frame fits tight spaces
  • Light 42 g weight eases installation in portable devices

Specifications

No published specifications for this item yet.

Questions about this item

What motherboard header does the 2-pin plug fit and what voltage does it deliver?

The 2-pin plug fits a standard motherboard fan header and delivers 24 V DC at 0.08 A, drawing 1.9 W.

What are the exact mounting dimensions for the 60 mm frame?

The fan measures 60 × 60 × 15 mm with a weight of 42 g, matching standard 60 mm mounting holes.

How do I connect the 2-pin plug without reversing polarity?

Align the plug with the header key; the red wire is positive and the black wire is ground — reversing them will prevent the fan from spinning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.