We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 80 mm frame 25 mm thick two-wire fan

Vszerda

Vszerda KD1208PTS1 80×80×25mm 12V 2.6W 2800RPM case fan

SKU CH-RT60-PENMF MPN KD1208PTS1

80×80×25 mm axial case fan running at 2800 RPM on 12 V with 2.6 W draw and 28 dB noise

  • Fits standard 80 mm mounting holes with 80×80×25 mm frame
  • Runs on common 12 V DC power supply rails
  • Low 2.6 W draw keeps system power budget in check
  • Spins at 2800 RPM for strong airflow through chassis
  • Quiet 28 dB operation suits noise-sensitive builds

12 V 80×80×25 mm axial case fan

The Vszerda KD1208PTS1 is a 12 V DC axial fan measuring 80×80×25 mm. It draws 2.6 W and spins at 2800 RPM while producing 28 dB of noise. The two-wire design suits chassis and power-supply cooling slots that accept an 8025 form factor.

Who this suits and who it does not

This fan fits repair jobs that need a direct 80×80×25 mm replacement running on 12 V. Builders who require PWM speed control, a three- or four-pin connector, or higher airflow than 2800 RPM provides should look at other models.

2800 RPM speed at 2.6 W

The single figure that decides fit is the 2800 RPM rating at 2.6 W. If the target device specifies that exact speed and power envelope the KD1208PTS1 matches; otherwise a different specification is required.

Highlights

  • Fits standard 80 mm mounting holes with 80×80×25 mm frame
  • Runs on common 12 V DC power supply rails
  • Low 2.6 W draw keeps system power budget in check
  • Spins at 2800 RPM for strong airflow through chassis
  • Quiet 28 dB operation suits noise-sensitive builds

Specifications

No published specifications for this item yet.

Questions about this item

Will the 80×80×25 mm frame fit my 80 mm mounting holes?

The fan measures 80×80×25 mm, matching standard 80 mm case and PSU mounting patterns.

How do I connect the 2-wire lead to a 12 V header without reversing polarity?

Align the red wire to the 12 V pin and the black wire to ground on the 2-pin header; the keyed connector prevents backwards insertion.

When should I plan to replace the sleeve-bearing fan running at 2800 RPM?

Sleeve bearings typically last several years at 2800 RPM; replace when noise rises above the rated 28 dB or airflow drops noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.