We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat cable with one 8-pin and two 6+2-pin connectors, 25+10 inches

Vszerda

Vszerda JZYMOD EPS/ATX 8 Pin to Dual PCI-E 8 Pin (6+2) Cable for Corsair PSUs 25+10 inches

SKU CH-XNV3-E28S2

EPS/ATX 8-pin to dual PCI-E 8-pin (6+2) cable for Corsair modular PSUs, 18AWG wire, 25 + 10 inch length

  • Terminal GenderMale-to-Male
  • EPS/ATX 8-pin splits into two PCI-E 8-pin (6+2) connectors for dual-GPU power
  • Designed exclusively for Corsair RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, TX-M, CS, CS-M, CX and CX-M modular PSUs
  • 18 AWG thick wiring delivers stable current for high-draw graphics cards
  • Black flexible flat array layout keeps cable routing tidy and airflow clear
  • Total reach of 25 inches plus 10 inches suits mid-tower and full-tower builds

Vszerda EPS/ATX to Dual PCI-E Cable

This cable converts a single EPS/ATX 12V 8-pin output on a compatible Corsair modular power supply into two PCI-E 8-pin (6+2) connectors for graphics cards. It is built for builders who need to power a GPU that requires two 8-pin or 6-pin sockets from one PSU port.

Limited to listed Corsair modular series only

The male-to-male design works exclusively with RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, TX-M, CS, CS-M, CX and CX-M power supplies. It cannot be used with the AX1200 unit or any non-Corsair modular PSU because the pin-out differs.

18AWG flat black wiring for tidy routing

Thick 18AWG conductors handle heavy current while the flexible flat array layout keeps cables flat against panels for clean airflow. The 25-inch lead to the first connector and 10-inch split to the second suits typical mid-tower layouts without excess slack.

Highlights

  • EPS/ATX 8-pin splits into two PCI-E 8-pin (6+2) connectors for dual-GPU power
  • Designed exclusively for Corsair RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, TX-M, CS, CS-M, CX and CX-M modular PSUs
  • 18 AWG thick wiring delivers stable current for high-draw graphics cards
  • Black flexible flat array layout keeps cable routing tidy and airflow clear
  • Total reach of 25 inches plus 10 inches suits mid-tower and full-tower builds

Specifications

BrandJZYMOD
Terminal GenderMale-to-Male

Questions about this item

Which cable length suits my build, 25-inch or 10-inch?

The cable provides a 25-inch main run from the PSU plus a 10-inch branch to the second GPU connector, giving a single fixed length rather than two separate options.

What does the 18AWG wire gauge mean for my GPU power delivery?

18AWG copper conductors handle the current required by 6-pin and 8-pin graphics cards without excessive voltage drop, supporting stable operation under load.

How does the EPS/ATX 8-pin interface limit which Corsair PSUs I can use?

The male EPS/ATX 8-pin end fits Corsair RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, TX-M, CS, CS-M, CX and CX-M modular supplies, but not the AX1200 model.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.