We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short internal cable with 19-pin plug splitting to Type-E and 19-pin headers

Vszerda

Vszerda Internal USB 3.0 19Pin to USB 3.2 Type-E & 19Pin Splitter 1.3ft

SKU CH-HEED-08BF2

Splits one motherboard USB 3.0 19-pin header into a USB 3.1 Type-E A-Key port and a second 19-pin header, adding up to four ports at 5 Gbps with a 1.3 ft cable and auxiliary power

  • Connector TypeLighting Connector to USB A
  • Splits one 19-pin header into two ports
  • USB 3.2 Gen 1 delivers up to 5 Gbps
  • USB 3.1 Type-E A-Key supports Type-C devices
  • Second port keeps USB 3.0 19-pin compatibility
  • 3 ft cable with 4-pin power for stable operation

Internal header splitter for desktop builders

This Vszerda adapter converts a single motherboard USB 3.0 19-pin header into two male ports. One port is a USB 3.1 Type-E A-Key for front-panel USB Type-C connectors, the other remains a USB 3.0 19-pin header. A short 1.3ft cable and a small 4-pin power connector are included for stable operation. Self-adhesive pads simplify mounting inside the case.

Capacity and headroom for USB expansion

The splitter supports data transfer up to 5Gbps under the USB 3.2 Gen1 specification. It enables up to four additional USB 3.0 ports, comprising two standard USB 3.0 and two USB Type-C connections. Backward compatibility covers USB 2.0, 1.1 and 1.0 peripherals. The single upstream 19-pin header remains the bandwidth bottleneck for all attached devices.

Thermals noise and power draw in normal use

The adapter is a passive cable assembly with no active cooling, so it generates no audible noise. Power for downstream devices is supplied through the dedicated 4-pin connector, reducing load on the motherboard header. Under typical peripheral loads the assembly runs at ambient temperature. No fan, pump or thermal interface material is involved.

Highlights

  • Splits one 19-pin header into two ports
  • USB 3.2 Gen 1 delivers up to 5 Gbps
  • USB 3.1 Type-E A-Key supports Type-C devices
  • Second port keeps USB 3.0 19-pin compatibility
  • 3 ft cable with 4-pin power for stable operation

Specifications

Connector TypeLighting Connector to USB A

Questions about this item

Will the 19-pin header on my current motherboard work with this splitter's USB 3.1 Type-E and USB 3.0 19-pin outputs?

The splitter converts a single motherboard USB 3.0 19-pin male header into two male ports: one USB 3.1 Type-E A-Key and one USB 3.0 19-pin, adding up to four internal ports including two Type-C.

How can I confirm the adapter is running at the rated 5Gbps after installation?

Connect a USB 3.0 device, then check your OS device list or system profiler to verify the link shows SuperSpeed 5Gbps instead of a lower rate.

Does the package include the extra 4-pin power connector and the self-stick mounts, or must I buy them separately?

The box contains the 1.3ft splitter cable with both output headers, an extra 4-pin power header, and self-stick pads for mounting; no separate purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.