Vszerda
Vszerda Internal SAS 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 50cm
Connects four SATA drives to a 4-port SAS controller at 6 Gbps using a 50 cm cable
Cable Length 100 cm
- 100 cm
- 50 cm
- Connect four SATA drives with one cable
- 6 Gbps SAS specification for fast data transfer
- 50 cm length fits compact server builds
- Straight 7-pin SATA connectors on host and target
- Supports RAID arrays for storage redundancy
Vszerda Internal SAS 4 SATA Host Cable
The Vszerda Internal SAS 4 SATA Host to 4 SATA 7pin Target cable connects up to four SATA drives to a single controller. It meets the 6Gb/s SAS specification for reliable data transfer in server and RAID environments. The 50 cm length suits standard internal chassis layouts.
Storage builders needing four direct SATA links
This cable suits builders who need four 7-pin SATA device connections from a 4 x SATA 7-pin host interface. It does not suit systems requiring a mini-SAS or other multi-lane host connector. Buyers needing longer reach than 50 cm should look at other lengths.
50 cm cable length
The 50 cm length determines whether the cable spans the distance between your controller and drive bays without tension or excess slack. Measure the internal routing path before purchase to confirm fit.
Highlights
- Connect four SATA drives with one cable
- 6 Gbps SAS specification for fast data transfer
- 50 cm length fits compact server builds
- Straight 7-pin SATA connectors on host and target
- Supports RAID arrays for storage redundancy
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What limits the 6 Gbps data rate when four drives are running continuously?
The 6 Gbps SAS specification governs each lane; the cable itself is built to meet that spec.
Does the cable add noticeable heat or noise during all-day operation?
It is a passive copper assembly with no active components, so it produces no noise and negligible heat.
What host-side connector must my controller provide for this cable?
The host end requires a single 4× SATA 7-pin port on the controller.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








