We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90 degree angled cable with 29 pin SAS connector and 22 pin SATA connector

Vszerda

Vszerda HX-SF-095 SAS SFF-8482 29 Pin to SATA 22 Pin 90 Degree Angled Cable

SKU CH-YNYV-S7NN1

Connects SAS SFF-8482 29-pin drives to SAS 22-pin ports at 6 Gb/s with a 90-degree angled copper conductor

  • Typesff-8482 cable
  • ColorBlack Adapter SAS29P-SATA22P Angled
  • Connector DetailSas Sata
  • Terminal GenderMale-to-Female
  • Speed6 gigabytes_per_second
  • ConductorCopper
  • Connect SAS drives via SFF-8482 29-pin interface
  • 90-degree angled connector eases tight chassis routing
  • Copper conductors support 6 gigabytes_per_second data rate
  • Male-to-female gender enables direct drive-to-controller link
  • Works only with SAS-capable controllers or SATA-to-SATA links

What this cable does

This adapter connects a SAS hard drive with an SFF-8482 29-pin port to a SAS-compatible SATA hybrid controller. It also links SATA drives to SATA motherboards and SAS drives to SAS motherboards. It is not for users who need to attach a SAS drive to a standard SATA-only motherboard or a SATA drive to a standard SAS-only motherboard.

The compatibility rule

The cable works only when both ends share the same protocol or when the host controller explicitly supports hybrid SAS/SATA operation. A 6 gigabytes_per_second rated link is provided over copper conductors with male-to-female gender. If your motherboard lacks a SAS chipset, a SAS drive will not function through this adapter.

Installing the adapter

The 90-degree angled housing eases routing in tight drive bays and aligns the 22-pin SATA side with standard backplane headers. Firm seating of both connectors is required; partial insertion causes link errors. No driver or configuration is needed beyond verified controller compatibility.

Highlights

  • Connect SAS drives via SFF-8482 29-pin interface
  • 90-degree angled connector eases tight chassis routing
  • Copper conductors support 6 gigabytes_per_second data rate
  • Male-to-female gender enables direct drive-to-controller link
  • Works only with SAS-capable controllers or SATA-to-SATA links

Specifications

BrandCY
ModelHX-SF-095
Typesff-8482 cable
ColorBlack Adapter SAS29P-SATA22P Angled
Connector DetailSas Sata
Terminal GenderMale-to-Female
Speed6 gigabytes_per_second
ConductorCopper
FeaturesSAS SATA Angled

Questions about this item

What does the 6 Gbps speed rating mean when this cable is installed in a compatible system?

The cable supports the SAS 6 Gbps signalling rate, so a SAS drive and SAS controller linked by this adapter will run at up to 6 Gbps.

How does the SFF-8482 interface affect which drives and controllers I can connect?

SFF-8482 is a SAS connector that also accepts SATA drives; this adapter only works between a SAS drive and a SAS controller or between a SATA drive and a SATA controller.

What clearance does the 90 degree angled connector need inside my chassis?

The 90 degree bend lets the cable run parallel to the drive, so you only need enough depth for the adapter body beside the SFF-8482 port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.