Vszerda
Vszerda HX-SA-121-DN 90° Down Angled SATA 22Pin 7+15 Male to 22P Female Adapter
A 90-degree down-angled SATA 22-pin male-to-female adapter passing 12 V, 5 V power and 6 Gbps data for 2.5-inch and 3.5-inch drives
- Typesata 22pin adapter
- Connector DetailSata 22pin 7+15 Male to Sata 22p Female
- Terminal GenderMale-to-Female
- Speed6 gigabits_per_second
- ConductorCopper
- Featuresangled
- Fits tight spaces with 90° down angled connector
- Delivers 6Gbps data plus 12V and 5V power
- Copper conductors ensure reliable signal transfer
- Works with 2.5" and 3.5" SATA drives
- Male-to-female 22-pin layout extends existing cables
90° Down-Angled SATA 22-Pin Adapter
The Vszerda HX-SA-121-DN is a SATA 22-pin 7+15 male-to-female adapter with a 90-degree down-angled connector. It transfers 12V and 5V power alongside 6 Gbps data. The design suits 2.5" and 3.5" SATA drives where straight cables cannot fit.
Builders with tight clearance around SATA ports
This adapter fits installations where a standard straight connector blocks adjacent components or case walls. It is not suited for builders who need a straight-through cable or an upward-angled variant for their specific layout.
Simple plug-in installation
Connect the male end to the drive or backplane and the female end to the host cable. The only common issue is forcing the angled connector the wrong way; ensure the down angle matches the available space before applying pressure.
Highlights
- Fits tight spaces with 90° down angled connector
- Delivers 6Gbps data plus 12V and 5V power
- Copper conductors ensure reliable signal transfer
- Works with 2.5" and 3.5" SATA drives
- Male-to-female 22-pin layout extends existing cables
Specifications
| Brand | Vszerda |
|---|---|
| Model | HX-SA-121-DN |
| Type | sata 22pin adapter |
| Connector Detail | Sata 22pin 7+15 Male to Sata 22p Female |
| Terminal Gender | Male-to-Female |
| Speed | 6 gigabits_per_second |
| Conductor | Copper |
| Features | angled |
Questions about this item
Which drive connectors does the 22-pin male end of this adapter plug into?
The 22-pin male end mates with the combined 7+15 SATA connector on any 2.5 or 3.5 SATA drive.
Will the 90-degree down angle clear a SATA port that sits close to a graphics card back-plate?
The 90-degree down angle routes the cable downward, freeing horizontal space around tight motherboard or back-plane ports.
How can I verify the link is running at the rated 6 Gbps after installation?
Check the negotiated speed in BIOS or OS disk utility; it should report 6 Gbps for a SATA III drive on a SATA III port.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



