We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Y-splitter cable with IDE 4-pin male to dual SATA 15-pin female connectors

Vszerda

Vszerda HX-SA-056 IDE 4-pin male to dual SATA 15-pin female power splitter cable

SKU CH-7BQ8-3F15C

Converts one IDE 4-pin power connector into two SATA 15-pin female sockets supporting 5 V and 12 V rails

  • TypeCY 15Pin Power Cable IDE 4pin Disk Power Male to Dual SATA F
  • ColorIDE-4P to Dual SATA-15P
  • Connector DetailSata Ide
  • Terminal GenderMale-to-Female
  • Speed6 gigabytes_per_second
  • ConductorCopper
  • Powers two SATA drives from one IDE connector
  • Supplies both 12 V and 5 V rails to each drive
  • Copper conductors deliver reliable power transmission
  • Y-splitter design adds a second SATA power outlet
  • Male IDE plug connects directly to power supply

IDE-to-SATA power adapter

The Vszerda HX-SA-056 converts a single IDE 4-pin male connector from a power supply into two SATA 15-pin female connectors. It lets builders add SATA drives to older PSUs that lack native SATA power outputs. The cable supports both 5 V and 12 V rails. Copper conductors carry the current between the connectors.

Upgrading from Molex-only supplies

This splitter replaces the need for a separate Molex-to-SATA adapter when the PSU still provides a free IDE 4-pin port. The jump is worth it when you have one IDE connector spare but need to power two SATA hard drives or SSDs. It avoids daisy-chaining multiple adapters that can loosen over time. No new power supply is required for this change.

Simple press-fit installation

Push the IDE male end firmly onto the PSU connector until the latch clicks, then attach each SATA female plug to the drive. The main risk is reversing the IDE plug, which the keyed shape prevents if oriented correctly. Loose SATA contacts can cause intermittent power, so verify each drive spins up reliably after first boot. Cable routing should avoid sharp bends near the connectors.

Highlights

  • Powers two SATA drives from one IDE connector
  • Supplies both 12 V and 5 V rails to each drive
  • Copper conductors deliver reliable power transmission
  • Y-splitter design adds a second SATA power outlet
  • Male IDE plug connects directly to power supply

Specifications

BrandVszerda
ModelHX-SA-056
TypeCY 15Pin Power Cable IDE 4pin Disk Power Male to Dual SATA Female Splitter Y 1 to 2 Extension Cable 12V+5V
ColorIDE-4P to Dual SATA-15P
Connector DetailSata Ide
Terminal GenderMale-to-Female
Speed6 gigabytes_per_second
ConductorCopper
FeaturesSATA IDE Power Splitter

Questions about this item

Will the IDE 4-pin male connector fit my existing power supply Molex port?

The IDE 4-pin male plug matches a standard 4-pin Molex output on the PSU and delivers both 5 V and 12 V rails.

Do I need any tools or drivers to install the splitter?

No tools or drivers are required; simply push the male end into the PSU Molex socket until it clicks, then attach SATA drives to the two female ports.

How long can I expect the copper conductors to last under continuous use?

Copper conductors rated for 6 Gb/s signalling typically provide years of reliable power delivery with no scheduled replacement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.