We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal box with HDMI and three RCA ports

Vszerda

Vszerda HDMI to HDMI+3RCA CVBS AV Converter 1080P@60Hz PAL/NTSC

SKU CH-F5WN-NRJ1R

Converts one HDMI input to simultaneous HDMI and composite RCA outputs at 1080P 60 Hz with PAL/NTSC support

  • Splits one HDMI source to HDMI and composite AV simultaneously
  • Hardware conversion with no driver installation required
  • Supports 1080P at 60 Hz and 4K at 30 Hz input
  • Outputs NTSC 480i or PAL 576i composite video
  • Metal housing provides passive heat dissipation

One Input to Two Outputs

This Vszerda converter takes a single HDMI source and delivers both an HDMI pass-through and a CVBS composite video plus stereo audio output at the same time. It handles 1080P at 60 Hz as well as 4K at 30 Hz on the HDMI side, while the RCA ports output standard-definition 480i or 576i signals. The unit supports both NTSC and PAL television standards and requires the included 5 V 1 A power adapter to operate. No software drivers are needed for any connected device.

Build Integration and Signal Flexibility

The metal enclosure dissipates heat without a fan, so the adapter fits into tight equipment racks or behind displays without airflow concerns. Because it splits the signal rather than switching it, the HDMI output remains active for a modern display while the composite feed serves a legacy recorder or second screen. HDCP 1.3 compliance on the HDMI path means protected content from streaming sticks, consoles or Blu-ray players passes through without interruption. The compact form factor adds no measurable bulk to a cable run.

Included Power Adapter Enables Immediate Use

A 5 V 1 A mains adapter ships in the box, eliminating the hunt for a spare USB charger or powered port. Plug the converter in, connect the HDMI source and both outputs, and the unit is live — there is no configuration menu or firmware update to manage. This makes the kit practical for installers who need to bridge HDMI gear to older AV infrastructure on the same day the hardware arrives.

Highlights

  • Splits one HDMI source to HDMI and composite AV simultaneously
  • Hardware conversion with no driver installation required
  • Supports 1080P at 60 Hz and 4K at 30 Hz input
  • Outputs NTSC 480i or PAL 576i composite video
  • Metal housing provides passive heat dissipation

Specifications

No published specifications for this item yet.

Questions about this item

Does the 1080P@60Hz output hold up during long sessions or does the converter throttle?

The converter handles 1080P@60Hz continuously with its metal shell providing passive heat dissipation; no active cooling or throttling mechanism is specified.

How much heat or fan noise appears when the unit runs all day?

The metal enclosure dissipates heat passively, so the device runs silently with no fan; surface temperature rises but stays within normal operating limits for continuous use.

Which cables and power source must I already have to connect this converter?

You need an HDMI source cable, an HDMI display cable, a 3‑RCA composite cable for the AV output, and a free USB port or 5 V/1 A mains adapter for the included power supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.