Vszerda
Vszerda HDMI Female to Female Adapter 8K 60Hz 4K 240Hz Grey
Connects two HDMI cables for 8K at 60 Hz or 4K at 240 Hz with 48 Gbps bandwidth
- Supports 8K at 60 Hz and 4K at 240 Hz for ultra-high-definition viewing
- 48 Gbps bandwidth meets HDMI 2.1 standard for smooth, noise-free transmission
- Aluminium alloy shell with 24 K gold-plated pins resists wear and blocks EMI
- Connects two HDMI cables into one longer run without signal loss
- Compatible with desktop, laptop, monitor, Switch 2 and TV setups
Ideal for extending HDMI cables
This Vszerda HDMI female-to-female adapter joins two HDMI cables into one longer run. It supports 8K at 60 Hz and 4K at 240 Hz for desktop, laptop, monitor, television and Switch 2 setups. The grey aluminium shell houses 24K gold-plated pins rated for over 10 insertion cycles.
Replaces a single long cable or damaged port
Use it when a factory cable is too short or when a device port is awkwardly placed. The 48 Gbps bandwidth meets the HDMI 2.1 specification, a clear step up from 2.0 limits. It also carries HDCP 2.3, HDR, Dolby Digital 7.1 and VRR signals without degradation.
Plug-and-play with no drivers
Simply insert both cable ends until they click; the metal shielding blocks EMI that often causes dropouts on long runs. The only common issue is a loose fit if either cable connector is worn, which can break the 48 Gbps link. Ensure both plugs seat fully before securing the run.
Highlights
- Supports 8K at 60 Hz and 4K at 240 Hz for ultra-high-definition viewing
- 48 Gbps bandwidth meets HDMI 2.1 standard for smooth, noise-free transmission
- Aluminium alloy shell with 24 K gold-plated pins resists wear and blocks EMI
- Connects two HDMI cables into one longer run without signal loss
- Compatible with desktop, laptop, monitor, Switch 2 and TV setups
Specifications
No published specifications for this item yet.
Questions about this item
What clearance does the 5.71 x 3.35 x 0.39 inch adapter need behind a panel or wall plate?
The coupler measures 5.71 inches long, 3.35 inches wide and 0.39 inches deep, so allow at least that depth behind the mounting surface for the two HDMI cables to sit flush.
How do you install the female-to-female coupler without degrading the 48 Gbps signal, and what step is often missed?
Push each HDMI cable fully into the gold-plated ports until the connector clicks; the common mistake is leaving a gap, which breaks the 48 Gbps path and causes drop-outs.
When should the adapter be replaced if the gold-plated pins wear after repeated insertions?
The connector is rated for over 10 mating cycles; replace the unit once insertion feels loose or you see intermittent 8K@60 Hz or 4K@240 Hz video.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



