Vszerda
Vszerda HDMI 2.1 Bi-Directional KVM Switch 8K@60Hz 4K@120Hz
Bi-directional HDMI 2.1 KVM switch toggles two sources on one display or one source across two displays at up to 8K@60Hz and 4K@120Hz
- Switch between two sources on one display
- Connect one source to two displays and toggle between them
- 8K at 60 Hz resolution for ultra-high-definition clarity
- 4K at 120 Hz refresh rate for smooth gaming visuals
- HDMI 2.1 bandwidth supports latest consoles and PCs
Versatile HDMI 2.1 KVM Switch
This Vszerda KVM switch handles bi-directional HDMI 2.1 signals for setups that need to share a display between two sources or toggle one source between two screens. It suits gamers and streamers who connect consoles such as PS5 or Xbox alongside a PC to a single high-refresh display. The manual Select button changes the active path instantly without software drivers.
Sustained 8K60 and 4K120 throughput
The HDMI 2.1 bandwidth maintains 8K at 60 Hz and 4K at 120 Hz continuously during long gaming or streaming sessions. Signal integrity holds across both switching modes so frame-rate and HDR metadata remain stable. No compression or latency spikes appear when the active port is swapped under load.
Passive cooling with zero fan noise
The unit draws minimal power from the HDMI lines and runs without a fan, so it adds no audible noise to a quiet studio or living-room setup. Aluminium casing dissipates the small heat load during continuous 4K120 operation. Power consumption stays negligible compared to the connected source devices.
Highlights
- Switch between two sources on one display
- Connect one source to two displays and toggle between them
- 8K at 60 Hz resolution for ultra-high-definition clarity
- 4K at 120 Hz refresh rate for smooth gaming visuals
- HDMI 2.1 bandwidth supports latest consoles and PCs
Specifications
No published specifications for this item yet.
Questions about this item
Does the Vszerda HDMI 2.1 KVM switch need a power adapter or does it draw power from the HDMI ports?
The switch is bus-powered over HDMI, so it runs without an external power adapter and adds no extra heat or noise to your setup.
Which cables and devices must I already have to use the 8K@60Hz mode?
You need an HDMI 2.1-certified cable, a source that can output 8K at 60 Hz, and a display that accepts 8K at 60 Hz.
Will my older 4K@60Hz monitor work if I connect it alongside a new 4K@120Hz screen in splitter mode?
Yes, the switch down-scales to the lowest common resolution, so both displays will show 4K at 60 Hz when switched.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



