We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda Gigabit Ethernet splitter with USB power cable and gold-plated RJ45 ports

Vszerda

Vszerda Gigabit Ethernet Splitter 1 to 2 USB Powered network ethernet cable

SKU CH-S4NM-C16RV

Splits one Ethernet connection into two simultaneous 1000 Mbps ports with USB power and plug-and-play setup

  • One cable becomes two live ports
  • Dual outputs reach 1000 Mbps each
  • Works with Cat5 through Cat8 cables
  • Gold-plated contacts keep signals stable
  • USB power cable included for operation

One-to-two Ethernet splitter

The Vszerda Gigabit Ethernet Splitter divides a single RJ45 feed into two simultaneous network outputs. It targets installers who need an extra wired port at a desk, media centre or set-top box without pulling new cable. The device draws operating power from the included USB cable and requires no driver installation.

Plug-and-play installation

Connect the upstream cable to the single RJ45 port and link two downstream devices to the dual outputs, then attach the USB lead to any 5 V USB socket for power. Gold-plated contacts resist oxidation and maintain signal integrity across Cat5 through Cat8 cabling. The only common issue is forgetting the USB power connection, which leaves the splitter inactive.

Check cabling and port availability

Verify that the existing run uses Cat5e or higher to achieve the stated 1000 Mbps rate on both outputs. Ensure a spare USB-A port or charger is reachable at the installation point because the splitter cannot operate without external power. Confirm the router or switch port you will use is free and not already running at a negotiated speed below gigabit.

Highlights

  • One cable becomes two live ports
  • Dual outputs reach 1000 Mbps each
  • Works with Cat5 through Cat8 cables
  • Gold-plated contacts keep signals stable
  • USB power cable included for operation

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the splitter is delivering 1000 Mbps to both ports after plugging it in?

Connect both Ethernet cables to devices, then run a speed test on each; both should show up to 1000 Mbps if the upstream link supports it.

What comes in the box and what extra items are needed to use it?

The splitter and a USB power cable are included; you must supply two Cat5/5e/6/7/8 Ethernet cables and a USB power source such as a charger or PC port.

Which version of this splitter should I choose for a Cat6a installation?

Only one model is offered; it works with Cat5, Cat5e, Cat6, Cat7 and Cat8 cables, so the same unit covers a Cat6a run.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.