We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8-inch power splitter cable with one EPS 8-pin female connector branching to two PCIe 8-pin (6+2) male connectors

Vszerda

Vszerda EPS 8-pin to dual PCIe 8-pin splitter cable 8 inches 18AWG

SKU CH-RS0P-34ATJ

Converts an EPS 8-pin CPU connector into two 8-pin PCIe connectors for graphics cards, using 18AWG copper conductors over an 8-inch length

  • Splits one CPU EPS connector into two PCIe power feeds for dual GPU support
  • 18AWG tinned copper conductors deliver reliable current to demanding graphics cards
  • 6+2 pin design fits both 6-pin and 8-pin GPU sockets without adapters
  • Compact 8 inch length keeps cable routing tidy inside small chassis
  • Female EPS to dual male PCIe layout connects directly from PSU to graphics cards

EPS 8-pin to dual PCIe splitter

This Vszerda adapter converts a single CPU EPS 8-pin female connector into two PCIe 8-pin (6+2) male connectors. It uses 18AWG tinned copper conductors and measures eight inches in length. The cable draws supplemental power for graphics cards directly from the EPS rail of the power supply.

Suits builds needing extra GPU connectors

Builders who have spare EPS ports on their power supply and need to power one or two 6-pin or 8-pin graphics cards will find this cable useful. It is not for systems that lack an available EPS 8-pin output or for installations requiring longer cable runs than eight inches allow.

Bundled connectors change the power topology

The single female EPS end plugs into the existing CPU power cable from the power supply, while the two male PCIe ends connect directly to the graphics card. This arrangement eliminates the need for separate PCIe cables from the power supply and supports both 6-pin and 8-pin card inputs.

Highlights

  • Splits one CPU EPS connector into two PCIe power feeds for dual GPU support
  • 18AWG tinned copper conductors deliver reliable current to demanding graphics cards
  • 6+2 pin design fits both 6-pin and 8-pin GPU sockets without adapters
  • Compact 8 inch length keeps cable routing tidy inside small chassis
  • Female EPS to dual male PCIe layout connects directly from PSU to graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

My power supply only has EPS 8-pin cables — can I use this splitter to run a graphics card?

Yes, the female EPS 8-pin end plugs into your PSU’s CPU cable and the two male 8-pin (6+2) ends power the graphics card.

Will this adapter work with my older 6-pin graphics card?

Each 8-pin (6+2) connector splits into a 6-pin portion, so it fits both 6-pin and 8-pin card sockets.

How can I verify the cable is delivering power correctly after I connect it?

The system should POST and the GPU fans should spin; if the card appears in device manager without power-limit warnings, the connection is sound.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.