We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda Dual SATA 15pin to PCIe 8pin (6+2) Power Adapter Cable 8 Inches

SKU CH-7X5S-XQP61

Converts two SATA 15-pin power connectors into one PCIe 8-pin (6+2) graphics-card plug using 18 AWG tinned-copper wire in an 8-inch yellow-and-black cable

  • Dual SATA 15pin connectors power a PCIe 8(6+2) pin graphics card
  • 8 inch cable length fits most PC cases neatly
  • 18AWG tinned copper conductors carry 12V DC reliably
  • UL1007 rated wire insulation meets safety standards
  • Converts two SATA power outputs to one PCIe 8pin connector

Dual SATA to PCIe 8-pin adapter

This 8-inch cable converts two SATA 15-pin power connectors into a single PCIe 8-pin (6+2) plug. It lets you power a graphics card from a PSU that lacks a native PCIe connector. The 18AWG tinned copper conductors are rated for 12 V DC.

Builders adding a GPU to an older power supply

Suits anyone fitting a card that needs an 8-pin PCIe feed while the PSU only offers SATA power leads. Not for systems where the PSU already provides the required PCIe connectors. Also unsuitable if the graphics card draws more current than two SATA connections are rated to deliver safely.

18AWG tinned copper wire gauge

The 18AWG UL1007 conductors set the safe current limit for the adapter. Check the card’s power specification against this wire gauge before installing. The fixed 8-inch length also determines whether the cable reaches your GPU inside the case.

Highlights

  • Dual SATA 15pin connectors power a PCIe 8(6+2) pin graphics card
  • 8 inch cable length fits most PC cases neatly
  • 18AWG tinned copper conductors carry 12V DC reliably
  • UL1007 rated wire insulation meets safety standards
  • Converts two SATA power outputs to one PCIe 8pin connector

Specifications

No published specifications for this item yet.

Questions about this item

Should I use one SATA connector or both when powering an 8-pin GPU?

Both SATA 15pin connectors must be used; the adapter is designed to draw 12 V DC through two SATA leads to feed the PCIe 8(6+2) pin plug.

Will 18 AWG tinned copper wire handle the load of a modern graphics card?

The 18 AWG UL1007 conductors are rated for the 12 V DC supply this cable carries; keep total GPU draw within the power supply and SATA connector limits.

Does the PCIe 8(6+2) plug work with both 6-pin and 8-pin GPU sockets?

Yes, the 6+2 pin female connector splits to fit either a 6-pin or an 8-pin PCIe power socket on the graphics card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.