Vszerda
Vszerda Dual NGFF to SATA Adapter 2 Port M.2 B Key 3.0 2230 2242 2260 2280
Connects two M.2 B-key SATA SSDs (2230, 2242, 2260 or 2280) to a SATA 3.0 host interface
- Add two M.2 SATA SSDs via a single SATA 3.0 port
- Supports 2230 2242 2260 2280 B-key drives
- 6 Gbps SATA speed for each connected SSD
- Compact riser board fits standard PC cases
Dual NGFF B-Key SATA Adapter
This adapter converts two M.2 SATA SSDs with B-key notches into standard SATA 3.0 6Gbps connections. It accepts drive lengths of 2230, 2242, 2260 and 2280, allowing a pair of drives to be installed in a single expansion slot or drive bay.
For adding two SATA M.2 drives to a desktop PC
Suitable for builders who have B-key SATA SSDs in the listed lengths and free SATA ports on the motherboard. Not for M-key only slots, drives using a different protocol, or installations requiring more than two drive positions.
Highlights
- Add two M.2 SATA SSDs via a single SATA 3.0 port
- Supports 2230 2242 2260 2280 B-key drives
- 6 Gbps SATA speed for each connected SSD
- Compact riser board fits standard PC cases
Specifications
No published specifications for this item yet.
Questions about this item
Will this adapter let me keep using my existing SATA 3.0 cables when I add an M.2 2280 B-key SSD?
Yes, the board converts the M.2 B-key signal to a standard SATA 3.0 6Gbps connector so your current cables plug straight in.
How can I confirm the 2230 or 2242 drive is recognised at full 6Gbps speed after installation?
Check the BIOS or OS disk utility for a SATA 3.0 6Gbps link rate and run a sequential read test to verify throughput.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



