Vszerda
Vszerda Dual 6 Pin to 8 Pin PCIe Adapter Cable 5.5 Inch 14CM 18 AWG 5pcs
Dual 6-pin to 8-pin PCIe adapter cable with 18 AWG pure copper wire and 14 cm length for graphics card power
- Flame-retardant braid protects wiring inside the case
- 18 AWG pure copper carries stable current to the GPU
- Dual 6-pin female plugs draw power from the PSU
- 8-pin male connector fits graphics cards from Radeon and other brands
- Five cables in the pack cover multi-GPU builds
Dual 6-pin to 8-pin PCIe adapter cable
This Vszerda adapter converts two 6-pin PCIe female connectors from a power supply into a single 8-pin PCIe male connector for a graphics card. It is built with 18 AWG pure copper wire inside a flame-retardant braid. The cable length is 5.5 inch or 14 cm. The pack contains five cables for multi-GPU builds or spares.
Builders upgrading a GPU that needs 8-pin power
The cable suits systems where the PSU only offers 6-pin PCIe outputs but the new graphics card requires an 8-pin input. It is not for setups that already provide native 8-pin connectors, nor for cards that demand dual 8-pin or 12-pin power. It also cannot replace a missing 6-pin source on the PSU side.
18 AWG pure copper conductor
The wire gauge and insulation determine safe current delivery to the GPU. Each adapter uses 100 percent copper cores rated at 18 AWG wrapped in a flame-retardant sleeve. This specification is the deciding factor for compatibility with the power draw of the target graphics card.
Highlights
- Flame-retardant braid protects wiring inside the case
- 18 AWG pure copper carries stable current to the GPU
- Dual 6-pin female plugs draw power from the PSU
- 8-pin male connector fits graphics cards from Radeon and other brands
- Five cables in the pack cover multi-GPU builds
Specifications
No published specifications for this item yet.
Questions about this item
What PSU connectors must I have free to run this dual 6-pin to 8-pin adapter?
Your power supply needs two spare 6-pin PCIe female outputs to plug into the adapter’s dual female ends.
Will this 14 cm cable reach an 8-pin GPU port on a card that sits close to the PSU in a compact case?
At 5.5 inches the cable is short, so it works best when the graphics card’s 8-pin socket is near the PSU’s 6-pin leads.
How can I confirm the adapter is delivering power once everything is connected?
The GPU should power on normally and the system should post without a missing-power warning; the 18 AWG pure-copper wires and flame-retardant braid are built for continuous load.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



