Vszerda
Vszerda DP403B-USB3.0-CZY KVM Switch 3 Monitors 4 Computers 8K@60Hz DP1.4 USB 3.0 Black Manual Switch
Triple-monitor KVM lets four computers share one keyboard, mouse and three DisplayPort screens at up to 8K@60Hz with USB 3.0 and audio
- TypeBipolar Transistor
- PC SelectionBipolar Transistor
- Power Features5 volts
- Dimensions23.01 in x 17.2 in x 5.79 in
- Weight0.98 kilograms
- Share four computers across three monitors for a clutter-free multi-system workspace
- Switch instantly between systems using front-panel buttons or the included wired remote
- Connect three USB 3.0 peripherals and audio devices once for all four computers
- Rear-mounted ports keep cables hidden behind the unit for a clean desk
- Supports resolutions up to 8K at 60 Hz when graphics cards and monitors allow
Triple-Monitor KVM for Four Computers
The Vszerda DP403B-USB3.0-CZY lets four desktops or laptops share one keyboard, mouse and three DisplayPort monitors. It is built for users who need extended or mirrored layouts across three screens from any of the four connected systems. Each computer must provide three DisplayPort outputs and a USB link to match the switch’s input groups. Buyers whose machines have fewer than three video outputs or who want to share only one or two monitors cannot use this unit as intended.
8K@60Hz via DisplayPort 1.4
The switch passes DisplayPort 1.4 signals up to 8K resolution at 60 Hz, provided every source GPU and every display also support that mode. Lower resolutions and refresh rates are handled automatically. The spec is the single deciding factor: if your graphics cards or monitors top out at 4K, the 8K headroom goes unused, but the switch still works; if any link in the chain lacks DisplayPort 1.4 bandwidth, the 8K@60Hz target cannot be reached.
Manual Button or Wired Remote Switching
A front-panel button and an included wired remote give two ways to change the active computer. The 5 V power adapter must be connected for reliable operation. All cable ports face the rear, keeping the desk tidy, but installation requires matching each computer’s three DisplayPort cables and one USB cable to the correct numbered input group (IN1 through IN4). Cross-connecting any of those twelve video leads plus four USB leads breaks the switching logic, so careful labelling during first setup is essential.
Highlights
- Share four computers across three monitors for a clutter-free multi-system workspace
- Switch instantly between systems using front-panel buttons or the included wired remote
- Connect three USB 3.0 peripherals and audio devices once for all four computers
- Rear-mounted ports keep cables hidden behind the unit for a clean desk
- Supports resolutions up to 8K at 60 Hz when graphics cards and monitors allow
Specifications
| Brand | Vszerda |
|---|---|
| Model | DP403B-USB3.0-CZY |
| Part Number | DP403B-USB3.0-CZY |
| Type | Bipolar Transistor |
| PC Selection | Bipolar Transistor |
| Power Features | 5 volts |
| Dimensions | 23.01 in x 17.2 in x 5.79 in |
| Weight | 0.98 kilograms |
Questions about this item
What does 8K@60Hz actually deliver when my graphics card and monitors both support it?
The switch passes an 8K signal at 60 frames per second to each of the three displays, provided every computer GPU and every monitor is rated for 8K@60Hz.
How does the DisplayPort 1.4 interface limit what resolutions and refresh rates I can run?
DP 1.4 caps the link at the bandwidth needed for 8K@60Hz, so any higher refresh rate or deeper colour depth at 8K will not be transmitted.
What physical space and mounting clearance does the unit need on my desk?
The chassis measures 23.01 in wide, 17.2 in deep and 5.79 in high and weighs .98 kg, so allow at least that footprint plus cable bend radius behind it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation 4K60 HDMI Dual-Head KVM Switch 4 Port
$774.99
0.00901843BTC
In stock