Vszerda
Vszerda DisplayPort 1.4 DP to DP & HDMI Video Splitter 8K@30Hz 4K@120Hz MST SST HDR
Splits one DisplayPort 1.4 source into DP and HDMI outputs supporting 8K at 30 Hz and 4K at 120 Hz with MST and SST modes
- Drives two displays simultaneously from one DisplayPort output
- Delivers 8K resolution at 30 Hz for ultra-sharp visuals
- Runs 4K at 120 Hz for smooth high-refresh gaming
- Supports 1440p up to 165 Hz on DisplayPort for competitive play
- Works with DisplayPort 1.4, 1.3, 1.2 and 1.0 sources
Vszerda DisplayPort 1.4 Splitter
This Vszerda splitter takes a single DisplayPort 1.4 source and drives two monitors simultaneously through one HDMI and one DisplayPort output. It is designed for professionals managing digital signage in schools, churches, conference rooms or retail spaces who need to mirror or extend a desktop across two displays without switching cables.
Sustained multi-monitor operation
The hub maintains stable output at 8K 30Hz or 4K 120Hz across both ports during extended sessions. DisplayPort output supports 1440p at 165Hz and 144Hz for high-refresh workflows, while HDMI output is limited to lower refresh rates at that resolution. MST and SST modes are both available so the operating system can treat the screens as independent or cloned surfaces.
Verify host and cable readiness
Confirm your computer's DisplayPort port supports MST for extended desktop mode; some GPUs or laptops only allow SST mirroring. Use certified DisplayPort 1.4 and HDMI cables rated for the target resolution and refresh rate to avoid signal degradation. Ensure the source device firmware and graphics drivers are current for full compatibility.
Highlights
- Drives two displays simultaneously from one DisplayPort output
- Delivers 8K resolution at 30 Hz for ultra-sharp visuals
- Runs 4K at 120 Hz for smooth high-refresh gaming
- Supports 1440p up to 165 Hz on DisplayPort for competitive play
- Works with DisplayPort 1.4, 1.3, 1.2 and 1.0 sources
Specifications
No published specifications for this item yet.
Questions about this item
Does the Vszerda DisplayPort 1.4 splitter draw extra power or run hot when driving two monitors at 4K 120Hz all day?
The splitter is bus-powered from the DisplayPort source and has no fan; it stays cool under normal extended-desktop loads at 4K 60Hz or 4K 120Hz.
What must my computer already have for this splitter to drive two displays in extended mode?
Your GPU needs a DisplayPort 1.2 or newer output that supports MST; most modern discrete cards and recent integrated graphics meet this requirement.
Will my older 1440p 144Hz monitor work on the HDMI port while the new 4K screen uses the DisplayPort output?
Yes — the HDMI port handles 1440p up to 144Hz, and the DP port handles 4K up to 120Hz simultaneously in extended mode.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



