We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black axial fan ninety-two by ninety-two by thirty-eight millimetres three wires

Vszerda

Vszerda Delta PFB0924GHE 92x92x38mm DC 24V 0.76A Axial Fan

SKU CH-54C6-QCWKT

A 92 mm square DC 24 V axial fan with double ball bearings, spinning at 6000 rpm and rated at 60.5 dB

  • High airflow at 6000 RPM for efficient cooling
  • Double ball bearing ensures long-lasting reliability
  • Low 0.76 A draw keeps power consumption minimal
  • CE certified for safety and compliance
  • Compact 92×92×38 mm fits tight enclosures

24 V 92 mm Axial Fan

This Vszerda Delta PFB0924GHE is a new 92 mm square axial fan with a 38 mm frame depth. It runs on 24 V DC, draws 0.76 A and spins at 6000 min-1 using a double ball bearing. The unit produces 60.5 dB of noise and carries CE approval.

Suits 24 V cooling slots; not for other voltages

The fan fits equipment designed for a 24 V DC supply and the 92 x 92 x 38 mm mounting pattern. Buyers who need a different supply voltage, a thinner or thicker frame, or a quieter acoustic level should look at other models.

Double ball bearing at 6000 min-1

The double ball bearing supports the rated 6000 min-1 speed and 24 V operation. This bearing type and speed rating are the key specifications that determine whether the fan matches the thermal and reliability requirements of the target system.

Highlights

  • High airflow at 6000 RPM for efficient cooling
  • Double ball bearing ensures long-lasting reliability
  • Low 0.76 A draw keeps power consumption minimal
  • CE certified for safety and compliance
  • Compact 92×92×38 mm fits tight enclosures

Specifications

No published specifications for this item yet.

Questions about this item

Will the 0.76 A draw at 24 V limit continuous operation?

The fan draws 0.76 A at 24 V DC, so your power supply must sustain that current without voltage sag for all-day use.

How loud and hot does the 6000 min-1 fan get after hours of running?

Noise is rated at 60.5 dB at 6000 min-1; the double ball bearing handles heat well, but the unit has no built-in thermal throttle.

What connector or wiring must I already have to install this 3-wire axial fan?

You need a 24 V DC source and a 3-pin header or solder points matching the fan’s three leads for power, ground and tach signal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.