We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with USB Type-C plug and 4-pin 2.54mm header

Vszerda

Vszerda CY-UC-175 USB 3.1 Type-E to 2.54mm 4-Pin Cable 30cm

SKU CH-XQ0W-0RQRK

A 30cm cable converts a motherboard USB 3.1 Type-E header to a 2.54mm 4-pin USB 2.0 connector supporting 480Mbps data and 500mA power

  • TypeUSB
  • Connector TypeUSB Type C
  • Cable Length0.3
  • Length0.3
  • Connector DetailUSB Type C
  • Featuresshock-resistant
  • Converts a motherboard USB 3.1 Type-E header to a 2.54mm 4-pin USB 2.0 connector
  • 30cm length fits tight internal spaces while keeping signal paths short
  • Latching 4-pin header secures the connection against vibration and accidental disconnect
  • Supports USB 2.0 data at 480Mbps and 5V 500mA power per port
  • Shock-resistant construction protects the cable during builds and upgrades

Internal header adapter

The Vszerda CY-UC-175 converts a motherboard USB 3.1 Type-E header to a 2.54mm 4-pin USB 2.0 header. It targets builders who need to connect legacy front-panel ports or accessories to a modern 20-pin internal connector. The cable is sold individually without any additional adapter in the package. It enables USB 2.0 power and data through the converted header.

Latched 4-pin connector

The 4-pin end uses a 2.54mm pitch header with a latch for a secure fit inside the case. Cable length is 30cm, routing from the Type-E motherboard header to the device. The link supports USB 2.0 at 480Mbps and delivers DC 5V 500mA per port. A shock-resistant feature helps the cable withstand vibration in tight-fit applications.

Check header pin-out

Verify that your motherboard provides a 20-pin Type-E header before ordering. The adapter only supplies USB 2.0 signalling, so devices requiring USB 3.x bandwidth will not operate at their rated speed. Ensure the 2.54mm 4-pin connector matches the target device header layout. Buyers needing a USB 3.x front-panel connection cannot use this cable for that purpose.

Highlights

  • Converts a motherboard USB 3.1 Type-E header to a 2.54mm 4-pin USB 2.0 connector
  • 30cm length fits tight internal spaces while keeping signal paths short
  • Latching 4-pin header secures the connection against vibration and accidental disconnect
  • Supports USB 2.0 data at 480Mbps and 5V 500mA power per port
  • Shock-resistant construction protects the cable during builds and upgrades

Specifications

Brandchenyang
ModelCY-UC-175
TypeUSB
Connector TypeUSB Type C
Cable Length0.3
Length0.3
Connector DetailUSB Type C
Featuresshock-resistant

Questions about this item

Does the USB 3.1 Type-E header on this cable carry USB 2.0 or USB 3.1 signals?

The Type-E connector converts the motherboard's 20-pin USB 3.1 header to a 2.54 mm 4-pin header that carries only USB 2.0 data at 480 Mbps and 5 V 500 mA power.

What spacing and latch style does the 4-pin header use so I can match my front-panel board?

The 4-pin header has a 2.54 mm pitch and includes a latch for secure mating with standard USB 2.0 front-panel connectors.

Which end plugs into the motherboard and which end goes to the device, and what is the cable length?

The Type-E end connects to the 20-pin motherboard header; the 4-pin end connects to the device. Cable length is 30 cm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.